UgCS group is dedicated to provide support for users of UgCS ground control software for drones. SPH Engineering developers and engineers will provide answers to your questions and be happy to receive bug-reports for further improvements.
UgCS is the best software to plan and fly drone survey missions, supporting most popular UAV platforms, providing convenient tools for areal and linear surveys and enabling direct drone control.
Compare features and licensing models: ugcs.com/pricing
Latest Activity: Feb 9
I received a trial license. But When I want to activate the license, it shows a message like: "Sorry, an error occurred during the license activation. Error call of activation service: 'Internal Service Error(500)'". (attached image)The error message is shown on my laptop. But on my desktop computer, it is fine.Any idea and solution??Thanks in advanceContinue
Hello all,I'm looking to find some help with figuring out what I'm doing wrong with my UgCS missions. I'm hoping someone can look at the mission and tell me what I'm doing wrong.I've been able to create a mission, connect to the drone, upload the mission to the drone and send the drone on its way. It reaches the first waypoint and then stops and just hovers in place. The drone does no other action until I hit the return to home button on the controller. I'm using a DJI Phantom AdvancedMy route…Continue
Dear all,I am trying to upload a mission to the aircraft and get this message:"The GPS signal of the aircraft is weak"Besides, I have 17 GPS, either in the UgCS for DJI and in telemetry.Can someone help me?Cheers,Felipe.Continue
Hello,We are using a DJI M600 with a Ronin MX gimbal and an Android tablet.When using the DJI app we can select between making the gimbal yaw and pitch using the C2 button on the controller, you then use the dial to move the gimbal. If we then switch to the UgCS app the C2 button will not switch between giving you yaw or pitch control, it will just be set to whatever the last setting was when using the DJI app. Is there a way to swap between having yaw/pitch control while a mission is being…Continue
I get this error when I'm planning very large missions (more than 1200 waypoints approximately) and trying to pair them down to a manageable size.Once I get this error, I'm unable to remove routes from the program since they show up again after about 30 seconds. I also can't edit the waypoints either since changes are not saved…Continue
When AreaScan is used, UgCS places extra waypoints to keep the flight path at a constant altitude above ground level. However, once the route is converted to waypoints, this functionality is lost. There needs to be a way to either convert the waypoints back to a route so the draping can happen again, or have a command to apply drape to segments. This would command UgCS to add waypoints along the segments to maintain height above ground.I've also needed this when I import a CSV of endpoints,…Continue
I need to do scans over a large area (not a camera) and I need the lines from each block to line up together. Is there a way to create an areascan mission with a basepoint? This way, all the lines will start from a common location. The basepoint needs to be able to be somewhere not in the survey area.Continue
Is it possible to select multiple waypoints? So far I have only found a way to select all the waypoints, or only 1. This makes it very awkward to edit a large plan, but I'm hoping there is a feature I'm missing, like a select tool.Continue