Hugues's Discussions (1,403)

Discussions Replied To (32) Replies Latest Activity

100KM

"Super! Possible d'avoir le fichier en version editable (.123dx ou format Autodesk ?)…"

Hugues replied Nov 17, 2017 to Alternative noses for the Talon (3D Printed)

21 Nov 17, 2017
Reply by Hugues

"Hi IronDome, For a case, you can order custom sizes at sites like this one : http://…"

Hugues replied Jun 12, 2016 to The New Talon - Where to Buy

4 Jun 12, 2016
Reply by IronDOME

"This is not the XUAV Talon but another new model called Talon max. It is 2000 dollar…"

Hugues replied Jun 7, 2016 to The New Talon - Where to Buy

4 Jun 12, 2016
Reply by IronDOME

MR60

"Hinges give the problem that they result in a space gap between the surface and the…"

Hugues replied Jan 21, 2016 to X-UAV Talon : careful about loosing ailerons...

13 Jul 29, 2016
Reply by Scott Pritchett

MR60

"Good idea. It is winter now here and a good time for building/ repairing stuff as we…"

Hugues replied Dec 8, 2015 to X-UAV Talon : careful about loosing ailerons...

13 Jul 29, 2016
Reply by Scott Pritchett

MR60

"I do not know suprabond. UHU is a glue from Germany, it might be difficult to find.…"

Hugues replied Dec 8, 2015 to X-UAV Talon : careful about loosing ailerons...

13 Jul 29, 2016
Reply by Scott Pritchett

MR60

"Thx Cala. Yes the surgical tape is exactly the same as 3M hinge tape. In fact 3M nev…"

Hugues replied Dec 7, 2015 to X-UAV Talon : careful about loosing ailerons...

13 Jul 29, 2016
Reply by Scott Pritchett

MR60

"As seen in my last blog published just now, we tried again an auto take off training…"

Hugues replied Jul 10, 2015 to How to reduce the Auto take off initial "drop" ?

7 Sep 7, 2015
Reply by Marc MERLIN

MR60

"So I should maybe set THR_DELAY to zero ? There is to my knowledge no parameters all…"

Hugues replied Jul 9, 2015 to How to reduce the Auto take off initial "drop" ?

7 Sep 7, 2015
Reply by Marc MERLIN

MR60

"Nice! Is the nose piece also in ABS ? Do you have the STL files for that ? What glue…"

Hugues replied Mar 16, 2015 to 3D printed Talon gliding pad cover

4 Sep 7, 2015
Reply by Will Snodgrass

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service