Information

UgCS

UgCS group is dedicated to provide support for users of UgCS ground control software for drones. SPH Engineering developers and engineers will provide answers to your questions and be happy to receive bug-reports for further improvements.

UgCS is the best software to plan and fly drone survey missions, supporting most popular UAV platforms, providing convenient tools for areal and linear surveys and enabling direct drone control.

Compare features and licensing models: ugcs.com/pricing

Website: http://www.ugcs.com
Members: 272
Latest Activity: on Friday

Discussion Forum

UgCS for DJI setup

Started by Mike Sousa. Last reply by Mike Sousa on Friday. 3 Replies

HiI've been able to get a number of routes to execute but still have some questions about some of UgCS for DJi's functionality:Can I get the video recording to start at a specific waypoint? I usually start it with the 'Set Camera Mode' section of the Mission Editor before uploading.Can I have the video recording stored on the Android device? Right now it is stored on an SD card inserted into the Mavic 2 Zoom.I've looked through the UgCS for DJI manual. Is there a video of how to use the app?…Continue

Viewing Mavic 2 Zoom Vision Sensors?

Started by Mike Sousa on Friday. 0 Replies

HiIs it possible to view the output of the Forward/Downward Vision Sensors on the Mavic 2 using UgCS for DJI?Thanks...Continue

UgCS for DJI drops connection to UgCS on laptop

Started by Mike Sousa. Last reply by Janis Jonins on Wednesday. 1 Reply

HiSometimes (many times?) when executing a route the connection between the Android device with UgCS for DJI and the laptop running the UgCS Ground Station software disconnect, and they may only be a few feet from each other. Has others experienced issues with comms having connection problems? I'm using a Samsung Galaxy Note 8 and a DJI Mavic 2 Zoom.Thanks...Continue

View DJI Mavic 2Zoom or Matrice 210 camera stream in UgCS PC UI

Started by Mike Sousa. Last reply by Janis Jonins Mar 19. 3 Replies

HiI've been flying my Mavic 2 Zoom with UgCS for DJI (either pre created missions or Manual), I can see the camera video on the phone (that has UgCS for DJI installed). Is there a way to view the live camera stream in the UgCS UI on my laptop (where the missions/routes are created)?Thanks...Continue

Capture and save manual flight path/mission for later use

Started by Mike Sousa. Last reply by Janis Jonins Mar 15. 8 Replies

HiI'm thinking that Joystick more or Manual Mode would be the way to do this. I'd like to fly the quad, have the flight path captured and saved so that it can be reloaded and used again automatically. Are there tutorials or more directions available for using the Joystick or Manual modes? If those aren't the ways to do this, would UgCS be capable using other its facilities?Thanks...Continue

Create map or grid from facade data collect

Started by Mike Sousa. Last reply by Janis Jonins Mar 15. 3 Replies

Hi After doing a façade data collect (bunch of images) is there a UgCS software utility/package that can generate a map or grid of the collected images? Once a collection has been done and analyzed, if needed, I'd like to be to send the drone to a particular location on the façade for some better images.Thanks...Continue

UgCS Mapper and Windows 7

Started by Mike Sousa. Last reply by Janis Jonins Mar 15. 1 Reply

I have a Windows 7 laptop with UgCS Mapper installed. When I try to run Mapper, it looks like a Box (Dos or javaw box?) come up and goes away very quickly or I would include what's in it here. Also, in Task Manager, while watching the 'Processes view, a javaw process does try to start but then goes quickly away when trying to start UgCS Mapper. Is Mapper usable at the moment? If so, does it work with Windows 7? If both questions are affirmative, does it work with output from a Facade…Continue

syncing drone clock to ugcs pc clock for geotagging

Started by Mike Sousa. Last reply by Mike Sousa Mar 14. 2 Replies

HiIs it possible to sync the clocks between the drone (in my case, a Mavic 2 Zoom or a Matrice 210 RTK) and the PC with UgCS running? This way I wouldn't need to account for an offset when geotagging an image collection.ThanksContinue

Preparing Facade Mission

Started by Mike Sousa. Last reply by Janis Jonins Mar 7. 5 Replies

HiIn watching the Facade prep video, how are the multiple path created (both vertical and horizontal) at around 40 secs into the video?Facade Mission Video LinkThanks...Continue

UgCS for DJI on Emulator

Started by Mike Sousa. Last reply by Janis Jonins Mar 4. 1 Reply

HiIs it possible to run the UgCS app on an Android Device Emulator? If so, are there preferred device emulators to use?Continue

Tags: Android, UcGS

Comment Wall

Comment

You need to be a member of UgCS to add comments!

Comment by Cameron Parker on February 26, 2019 at 5:00pm
I’m getting errors like area too large. Is there a limit to how many images you should process
Comment by Ricardo Procopio Nieto on August 14, 2018 at 4:07pm

Hi:

I am trying to read telemetry with version 2.13. But in the latitude and longitude these erroneous values ​​appear:

{"id": "TT_LATITUDE", "value": 0.33958137}, {"id": "TT_LONGITUDE", "value": - 1.7310266}

You have to do some calculation to obtain to get the positions like this: "19.456566, -99.180498.61.17" WGS-84.

Thanks in advance

Regards

Comment by Ricardo Procopio Nieto on August 13, 2018 at 3:19pm

Hi guys:

I'm new to UgCS and drones. I've been testing version 2.12 with Phantom 4 DJI with the Java SDK from here:

https://github.com/ugcs/ugcs-java-sdk.

Following the examples, I have managed to read telemetry, send commands and upload routes, but I have two limitations:

1.- When the telemetry is connected with version 3.0, it does not work correctly.

2.- I don't know how to manipulate camera rotation and drone movements. I tried sending the command "direct_payload_control", but it gives me the error: "command not registered".

Reading this documentation: http://docs.ugcs.com/ucs_vsm_commands_page.html#command_registering.

I understand that you have to register the command, but I still do not know how. Please someone help me.

Regards.

code.png

log.png

error_command.png

Comment by jinyoungyu on April 24, 2018 at 7:30am

I am working on UgCS for muti-Drone(arducopter).

I have some question now, I have tested the 2 quadcopters with ardupilot and here+ RTK GNSS, ESP-07 WIFI telemetry . but UgCS Pro version have lost the telemetry up/down links  on about 30~40 meter altitude. 

I have tested in LOS environment with TP-Link wifi router .

I want to control the drones over 150m at least.

please let me know how to solver this problem . which telemetry module I use for multi-drones.

Regards

Jin

Comment by DEEPESH PARATE on February 9, 2018 at 10:11am

I'm working on writing a parser code to convert xml exported from ugcs into a format suitable for paparazzi to use. The current flight plan xml that I have from ugcs has a completely different format from the one of paparazzi so I'm thinking of going for px4 flight plan. Can someone please tell me if it's going to be helpful or not?

Comment by Isabelle Heitz on February 2, 2018 at 11:29am

I have the same problem. How did you solve your problem ? 

Comment by belkacem guerbasse on November 20, 2017 at 8:22am
I installed the Android application I use a multirotor with a dji A3 I have a problem I have no indication of battery level
Comment by juan pablo gayoso on January 19, 2017 at 11:11am

is possible read mission file from UgCS to MissionPlanner, in both directions.

Comment by Marshall Cant on December 26, 2016 at 8:54am

I have the same problem.  My "Overshoot" field is also set to 0.

If you reduce overlap you also reduce the quality of the results.Pix 4D recommends 70% overlap (as does most other photogrammetry software).

Please explain how to correct this and have the UAV follow the outline of the area.

Thanks,

Marshall

Comment by Alex on December 26, 2016 at 3:57am

Adam Kelly, you got to make lower Forward overlap to get not so big overshoots.

 

Members (272)

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service