APM1 with ArduCopter V3.1.1 on an X quad.
Mission Planner 1.2.95
When the CLI Motor Test is initiated, nothing happens. Outside of the CLI, I can get the motors to spin up just fine with the transmitter, so I know they are working. This is what I think should work.
1. Open Mission Planner
2. Turn on transmitter
3. Connect USB to autopilot
4. Terminal > Connect
5. Type "test"
6. Type "motors"
You can share this discussion in two ways…
Share this link:
Send it with your computer's email program: Email this