Share 'Stuck on waiting for heartbeats from /dev/ttyAMA0'
I am trying to connect Rpi 3 Model B to flight controller (Dropix) and establish communication between them. I am following http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html page.
I have flashed APSync image on SD card. When I try:
mavproxy.py --master=/dev/ttyAMA0 --baudrate 57600 --aircraft MyCopter
the console says “waiting for heartbeat from /dev/ttyAMA0” and start…
You can share this discussion in two ways…
Share this link:
Send it with your computer's email program: Email this