I need some help with this one please.
Copter is a Steadidrone Flare sitting still on the Bench when suddenly the HUD shows a 20 degree roll that slowly increases.
I tried to fly the copter after not being able to reproduce the problem....guess what itRead more…
Please have a look at my attached log. the copter flies the mission fine but instead of hitting the waypoints it actually flies a curve before hitting the waypoint. Almost like a spline, however this copter is flying FW version 3.15. The miss
I had a oops yesterday, where I was performing a ROI flight to test the gimbal performance. My copter started of great and did what it was supposed to. heading from WP 3 to WP 4 it just suddenly crashed for no apparent reason.
Please have a loRead more…
I would like to ask for some help on here.
I have been flying Mapping missions for the past year without any incident and having lots of fun doing so.
Recently have added a new plane to my hanger that is basically exactly the same as the firstRead more…
I am just finishing of my hex and have stumbled upon a problem running 2 servos for the camera gimbal and one for a shutter.
With the 3DR power module attached and J1 removed servo outputs RC9-RC12 are powered from the power module. This meansRead more…
I have just received my new APM 2 and I was all excited about it. I had my plane ready to mount it.
Before mounting the APM I thought let me do the Compass declination and calibration before I fit it.
I can't get the compass to reliably work.
I connectRead more…
the heading actually says it all. I am wondering if it is save to supply the APM with 7 Volts.
Please, subscribe to get an access.