Hi,
I already made some mapping with this 3DR Plane without a problem, in this last flight the plane made 10 of the 13 waypoints and it just flew away and crashed, I managed to find the plane but I couldn't explain this behavior. Its the 3DR Pixhawk p
Read more…With everything updated firmware and MP (arduplane) now I'm geting this error when I try to geotag the pictures via TIME OFFSET. I've done this many times and never had this error before.
First Picture IMG_0035with DateTime: 2014:06:05 17:04:40
First
I just made another octocopter and installed 3.1, my throttle seems too sensitive, just lowering it a bit and the octo goes down fast, what PIDs I have to change to correct this?
Read more…Hi,
I accidentally connected APM 2.5 USB and Power at the same time with the wrong JP1 position, now everything works, I can fly with the board but I can't connect it, via USB or 3DR Radio. It doesn't recognize the board when I connect it via USB.
Is
Read more…Hi,
My friend just crashed his octocopter today and I don't know interpret this log.
It was a mission for mapping a small property, everything looked all right and then it took off in stabilize mode and then loiter to confirm if everything was good, a
Read more…Hi,
My Loiter upward movement is too slow and takes too long to get the copter where I want, where can I change the speed for loiter upward movement?
Read more…Hi,
Is there a software that can count automatically the number of plants in a crop?
Example, counting soy plants. I know there are several limitations to this but is there any software that can speed up the proccess? (besides ImageJ)
ALK
Read more…Hi,
Does the MP geotag tools tags the pitch, roll, yaw info on the picture? If not this will be a nice feature for some softwares to better process the data.
Read more…Got a new frame and in mission mode every time it makes a curve it loses altitude in the subsequent line, going from 80 meters to 50 meters and then recovering.
I don't have the airspeed installed and I don't have the log right now, what parameters sh
Read more…Hi,
I couldn't find the changelog of the upcoming Arducopter 3.1, only the changes from RC2 to RC3.
Can someone point a link with the changes? At least the main changes?
Thanks
Read more…Hi,
I was testing some simple mapping with a new octo and APM 2.5 (ublox gps) and followed the geottaging tutorial
http://copter.ardupilot.com/wiki/common-geotagging-images-with-mission-planner/
And I'm using a software to create the mosaics, the proble
Read more…I want to edit the altitude in tlog file for a software, how can I do that? I tried with notepad but the information is messed up.
Thanks
Read more…Hi,
My octo gets a good loiter for the first few seconds and then the toilet bowling begins, first it is small then it gets bigger and bigger, how do I correct this? What pids to change to minimize or to eliminate this?
Thanks
Read more…Ok, my stab is good with a big OCTO (tarot ironman) but the altitude hold is instable, sometimes when I turn it on it goes down like a rocket, sometimes it goes up and other times it just holds but not so good going slowy up and down.
Please can someo
Read more…Hi,
Just built an octocopter with APM 2.5 and 3.01 arducopter. In stabilize mode its flying really well, but when I change to Althold mode it goes up really fast and I have to change back to stabilize.
What pid or config I have to change to correct thi
Read more…Hi,
I'm a first time APM user in Multicopter, but not arduplane. I'm having an strange problem here, I made almost all the hardware configurations required (but not compassmot) when I start the motors (without propellers) even if I keep the throttle a
Read more…Hi,
I will use a catapult launcher to throw a heavier X8 wing and I want to use the auto take-off APM 2.5 function. I did read that it needs 3m/s before engaging throttle. So here are my 2 questions:
1) When changing to auto, does the throttle stick n
Read more…Hi,
I will use a catapult launcher to throw a heavier X8 wing and I want to use the auto take-off APM 2.5 function. I did read that it needs 3m/s before engaging throttle. So here are my 2 questions:
1) When changing to auto, does the throttle stick n
Read more…Hi,
I use mission planner in windows 7, never had any problem with it but today I started the update from 1.36 and right now when I try to start it shows a message that I need "microsoft framework 4.0" installed, but I've already installed 4.5 and it
Read more…Hi,
Kerstrel has this add on called OnPoint Viision that is really nice in stabilizing the video feed (via IP) Is there any alternatives that stabilizes video feed in real time like OnPoint?
Thanks
Read more…