"I forgot to mention that I am also selling my Basecam BGC 32 bit 3-axis gimbal controller, including two additional IMUs, and 3x Quanum 2208 brushless gimbal motors."
I am parting out my custom built folding Octo-Copter. Aluminum frame with 42" (1065 mm) motor to motor spacing. Scissor-folds to be 3" X 3" X 56" (75mm X 75mm X 1425mm) for easy storage and transportation. If you are interested in the frame please…
Hey im curious if anyone else has stumbled upon a jumper wire that is actually 3 wires by 8 wires. Right now i just have a bunch of singles going from my Rx to my apm and it is so messy and annoying to rewire. I glued my singles together, but now it…
"Hello Johann, Thanks for the quick response.
Yes, I am running 4S lipos... I had no idea that could affect it, considering they are supposed to work with 4S.
I have only flown for at most 2 minutes at a time, and I noticed on my last flight as i was…"
Hello everyone.. if you could just give me some advice on this i would be grateful.. So here is my problem:When designing my octocopter, I figured out what size of ESC to buy based on ecalc.ch calculations. They say for my exact current built that…
"Hello, its been a while since I started but I am happy to say that I flew it for the first time! Here is the video. Thanks for all of your help in the beginning!"
"okay I just layed everything out to see everything connected and it seems that I am missing the wires connecting the 8 channel reciever and the amp module.. Im not sure how i missed that. but now I am looking for them and cant seem to find them…"
"Well I just wanted to let you know that I have almost everything in hand now! All I am wait on is a battery charger, ESCs, transmitter, and the power distribution board to arrive in the mail. I have taken a weight measurement of every piece and my…"
"Okay, I believe I have everything figured out. Here is my parts list. The only thing I am worried about is that the total cost is coming to $1300. I can do that... Its just a lot of money to make the decision to buy everything quickly.. UGHparts…"
"Hello again, thank you for your advice. Putting the 18x5.5 props into ecalc I get 28 minutes of hover but only 7 minutes of combined.. also the throttle at hover is at just 27%. Is this a little low? with 16x5.5 I get 25 minutes of hover and 9…"
"Thanks! The main reason I wanted to go with an X-8 config instead of the traditional octo, is because of the minimum motor to motor spacing. I just calculated that with a traditional 8 motor layout and 18 inch blades, I need a minimum spacing of…"
"Thanks for the help! I have tried to use ecalc before but after a few hours couldnt get anywhere with it. I decided to buy the subscription, and I put in what you said and modified it a little bit to get almost 12 minutes of mixed flight. Is there…"
Hello all, I am stuggling to find an efficient motor/prop to use with a quadcopter I am going to build. I have seen on many forums people say that they can achieve over 1kg of thrust per 100W of power. I have taken all motors I could find on…