Gender
Male
About
About Me:
http://www.digital-mapping.net/
Please tell us a bit about your UAV interest
photogrammetry
Activity Feed
"RadioMaster TX16S is very popular. To bind FrSky X8R reciever I used mode FrSkyX2.
The Painless 360 channel on YouTube has some excellent tutorials for setting a Pixhawk of beginners:…"
The Painless 360 channel on YouTube has some excellent tutorials for setting a Pixhawk of beginners:…"
"Thanks for posting this Hugues.
Here are the settings I'm using for AUX5 (RC13=AUX5) configuration:
CAM_DURATION = 1CAM_TRIGG_TYPE = 1 (Relay)RC13_FUNCTION = 10 (camera_trigger)RELAY_PIN = 54 (Pixhawk AUXOUT5)
In Mission Planner going to INITIAL…"
Here are the settings I'm using for AUX5 (RC13=AUX5) configuration:
CAM_DURATION = 1CAM_TRIGG_TYPE = 1 (Relay)RC13_FUNCTION = 10 (camera_trigger)RELAY_PIN = 54 (Pixhawk AUXOUT5)
In Mission Planner going to INITIAL…"
""
"Excellent! worked like a charm.
This took care of a twitching problem related to ch6 with the use of the other method for setting up the DX7s for 6 flight modes.
http://diydrones.com/forum/topics/apm-2-5-twitching-problem"
This took care of a twitching problem related to ch6 with the use of the other method for setting up the DX7s for 6 flight modes.
http://diydrones.com/forum/topics/apm-2-5-twitching-problem"
"I can use my DX7s again.
I found a thread that shows another method for setting up 6 flight modes on the Spectrum DX7s using 1 channel . This took care of the twitching problem related to ch6.…"
I found a thread that shows another method for setting up 6 flight modes on the Spectrum DX7s using 1 channel . This took care of the twitching problem related to ch6.…"
"Good find Steffen. I ran auto tune multiple times on my APM quad. The twitch was always still there. I was using my Spektrum DX7s radio that is set up for 6 flight modes. It accomplished the 6 flight modes by mixing channels 5 and 6. I switched…"
"Does the voltage on the RC out need to be stepped up from 3 volts to 5 volts like with the Pixhawk?"
"Thanks for the info Chris."
"Thanks Chris, but that does not address the Pixhawk Mini specifically. I have used the method outlined here with an APM and it works perfectly.
http://diydrones.com/profiles/blogs/apm-to-chdk-camera-link-tutorial
Does the mini have an output for…"
http://diydrones.com/profiles/blogs/apm-to-chdk-camera-link-tutorial
Does the mini have an output for…"
"Can the Pixhawk Mini be used to trigger a CHDK enabled camera? If so what is needed?"
"Cool modular design!"
"ArduPilot compatible certainly makes this more attractive."
HobbyKing has recently updated their web site making it more difficult to hone in what you are looking for. I was trying to see what was available for 4s lipos, but it was so convoluted that I became frustrated and gave up. Before the web site…
"Will the AUX out be 3.3v or 5v? Curious because 5v is easier to set up CHDK camera triger.
Noticed on http://www.proficnc.com/ it shows Pixhawk 2.1"
Noticed on http://www.proficnc.com/ it shows Pixhawk 2.1"
