New webstore. 3D printed parts with hdml laminated material to produce "fly something different"

We have had our web store front open now for 2 weeks and we are proud to say we are very happy with our new customers who bought from us.  In celebration we have lowered our prices on all of our 3D printed parts.  Come and visit us and see what we ca

A custom frame that folds, can fly in quad format from 650-430. Can fly in Hex 700-500

Autonomous Flight parameter checklist

Since where on the subject of autonomous flight. Here is my check list.

#1. Make really sure the rth works every time. (try this out with different angles and directions). Once I am secure that rth works and lands in the same spot with the same result

APM 2.6 with ublox gps , pm and compass (bad compass health) and no gps detected.

I decided to get something a little more robust for my 43202 Torpedo Drones that I designed.  I have only been using the KK2.1 updated with the new firmware.  These all flew great, but the KK2.1 was missing some of the flight parameters that only ano

Items for Sale.

I am selling some motor mounts that are made out of a material that has a wood finish on it.  These are laser cut.  Selling them in packs of 4.  They have holes slot cut for 2mm or 3mm screws.

$12.00 a set.  18 grams.

Contact me by my email for purchas

Need some help with the following for my designs. Telemetry, GPS, barometric leveling, altitude hold

I have been using kk2.1 boards upgraded with stevis 1.9 firmware.

The highest motor I have used is 800 kv with 30 amp simonk flashed firmware.

I have created new styles of power distribution boards for each one of the designs.

Each of the designs are cr

Next design made out of the new material.

https://youtu.be/1it0kZNscUk

Basically the site and links tell it all.

This will be the fourth design made out of the new material flying.

Folding suitcase deltarotor for transportation. FPV capable.

Hello fellow fliers.

I want to take the time to share with you a project that is well underway and ready for orders.

It is a folding drone, (deltarotor is what I am calling them), that will fit inside of a small suitcase for travelling.  

The deltaroto

What makes an H design vs an X design?

Had a thought. Maybe someone with knowledge or has flown an H design (insert name here)cough, drone, quad, multirotor. I know about the x design, but the H design is something I can't find much on. I have never flown one. So I can't experiment with o

Suit Case Drone kits available in 3 weeks. Strong as carbon fiber, light as wood, Pretty as can be.

I found a material that is light as wood and strong as carbon fiber to make these drone designs out of.  The CNC is lined up to cut these out.  These will come with custom aluminum studs with brass knurled inserts that accept a 3mm screw.  The lead o

Introducing the Suitcase Drone.

I don't see many drones that are made out of solid wood.  Some say wood it is too heavy to fly.  I have been able to show that wood is just as light if used with the right power plant and matchup for the props.

With that being said here is the next pr

Someone to bounce ideas off of.

I have built two different designs so far in Inventor with some success I might add.  The goal is to be able cut these out with just your normal everyday workshop tools.  Both of the designs already been built and successfully flown.  Hit me up with