Boston UAV's Posts (2)

Sort by

RTFM - Just make sure it's the right manual..

This was an interesting day..

After noticing a friends SU-31 collecting dust in their basement, I asked to borrow the plane for a bit. Journey home, install a receive, download the manual,setup the control throws and expo - easy breasy. However, I did have trouble setting the CG just right and needed alot of weight on the tail which caused me to add the GOPRO which set it perfect - according to the manual.

Fast forward to the field - all setup and ready to go - give it some throttle - boom - blurry video (which I fail to clean). However, that's not the worst part. Final get to take off and this is pretty uneventful, but then I get in the air - super unstable. The CG is completely wrong and the control throws are wrong (luckily not terrible wrong). OK, well I set them to spec so maybe the battery got loose or I lost the camera on takeoff.. After a few minutes I get use to the way-off-CG/control throws and pull off a rather short landing - phew - awkward phone call averted.

So, I check the CG and throws again when it dawns on me, I'm looking at an E-flight manual, but this plane is from Great Planes!

All in all, a very lucky day for me and another lesson learned - and rather cheaply (one broken prop).

 

Read more…

FPV Equipment Test

Testing out some FPV equipment on the bench isn't as exciting as it should be. With some limited time this past weekend we mounted  (re: threw together a rats nest of wires and rubber bands) everything on a mobile test bed -  a 1/8 Scale MadStorm NP Truggy.

Components include:

  • DragonLink
  • 1W Lawmate @ 1280MHz Vtx
  • Lawmate Vrx
  • Fat Shark Dominator Video Goggles

 
1.8%2BExceed%2BMadStorm.JPG?width=250

 

Video of the car in action:

Unfortunately the majority of time was spent getting the car up and running!

Read more…