Danilo Scarato's Posts (7)

Sort by

 

bebop impazzisce al sole4

ORIGINAL POST IN ITALIAN LANGUAGE FROM QUADRICOTTERO NEWS: http://www.quadricottero.com/2015/07/il-bebop-drone-impazzisce-se-dallombra.html

For someone could be a way to do magic tricks but for the majority of those who use a Bebop is an annoying effect of which probably have not even noticed thinking is normal behavior or the cause of an error of piloting.

We are talking about a lack of flight behavior of the Bebop, seemingly inexplicable, which was recently reported by some users and on which we have investigated to discover the cause and find a solution.

Basically it happens that if the Bebop is flying in a gray area and is struck by the sun, suddenly drastically lowers the flight altitude as if the sun goes in the shade increases considerably the flight altitude. What happens at a short distance from the ground where the ultrasonic sensor that should keep the height, but the data fusion with the barometer so influence the final calculation that causes this effect.

The reports concern, perhaps only a coincidence, bebop yellow and so placing a specimen we tested it. And it went exactly as reported, making shadow in the area faired polystyrene, which is located under the GPS, bebop rooms share alone then dropped when the sun strikes.

bebop impazzisce al sole2

THE CAUSE OF BEBOP CLIMBING DOWN AND HE HIT BY SHADOW AND THE SUN

After detecting the problem, which affects the behavior of flight whenever there is' a change of light intensity from the sun (even just a cloud or fly / tack against the sun) we removed the hull polystyrene and found that under the GPS module is installed, the barometric pressure sensor MS 5607

bebop impazzisce al sole

bebop impazzisce al sole3

Despite being under the keel and angled downward, the 'MS5607 suffers from a little-understood problem, perhaps unknown even by engineers at Parrot who have chosen the materials for the fairing of the Bebop.

When hit by infrared / ultraviolet sunlight, this type of sensor (it was also successful on the DJI NAZA M V1 which mounted the 'MS5611 VIDEO ) varies the pressure reading indicating a false and deceiving the autopilot so he thinks to be a height different from that of a few moments before. E 'in this way that the bebop is a change in altitude sudden that, depending on the intensity of the instantaneous variation of the brightness, can be of several meters.

We have demonstrated in our video, just shade even with one hand, in the area of the hull where below is the GPS and the barometric sensor, the bebop gets up suddenly share. Analyzing the hull polystyrene we found that this material passes the light. Ours was yellow but we think that even the red and blue do go the same way the sun's rays.

To resolve must make sure that the sensor is in an environment where where is not hit by the light (from a change of brightness) and then a solution is to screen externally or internally the hull waiting for the Parrot notices the problem and propose an official solution.

IF YOU HAVE A BEBOP DO A TEST AND LET US KNOW Commenting THIS ARTICLE

THE VIDEO OF A USER WHO HAS OCCURRED THE PROBLEM

OUR TEST WITH TESTING SOLUTION

 
Read more…

ArmQuad V12

 

 

Hi,

 I built a  V shaped with 12 motor and coaxial prop 
I know that the V shape is patented by Asctec.
This is a test only for learning purpose.

Is based on Coridium ARMmite pro controller.

Motor: keda 50-20s with 8x4.5 prop

Gyro ITG3200, Acc BMA180, Lipo 5000 mAh

 



Read more…

ArmQuad v. 016 outdoor




I am continuing the ArmQuad software development.
I believe that soon I will release for FREE a ACRO software version with current (or improved ) performance that can be seen in these 2 videos.

Un saluto agli Italiani presenti in questa community.



Read more…

ArmQuad stable mode first flight

Hi,

This is my experimental quadrorotor. In this flight I'm trying the stable mode with the accelerometer.

ARM 7 32bit LPC2103 a 60Mhz ( Coridium ARMmite PRO )
ITG-3200 Triple-Axis Digital-Output Gyro, 16bit, digitally-programmable low-pass filter
BMA180 Triple Axis Accelerometer, 14Bit, Programmable integrated digital filters
ESC: PWM at 495Hz
R/C RECEIVER: PPM composite signal, 8 Channel

Greetings, Danilo


Read more…