Copter does not point to the new location for a Loiter mission entry.
Running Copter 3.0.1 and MP 1.2.66. I have a mission with these entries
1 Waypoint
2 Loiter - Time
3 Waypoint
4 RTL
The Loiter-Time entry has a new location from WP1 and WP3 has a diff
Read more…Mission Planner 1.2.63 and Arducopter 3.0.1 is flying mission fine until I add a waypoint to Loiter with 3 turns.
Some mission WPs with delays etc.. all work then goto WP 4
WP 4 just a normal way point altitude 100 feet
Loiter with Turns set tur
Read more…(Changed text 5/24/2012, 6/20/13)
You can now find all the details for compiling Mission Planner here http://dev.ardupilot.com/wiki/compile-mission-planner/
This post will probably be removed and is not current.
Here you will find information on downloa
Read more…Did a flight with my quad copter apm 2.5+ Arducopter firmware 2.9.1b
Downloaded dataflash .log file from Arducopter and saved the log file in two PCs
PC1 Running Vista, MP 1.2.51 (updated a few minites ago)
PC2 Running Windows 7 Professional MP 1.
Read more…I have V 2.9.1b loaded. I configured channel 7 to be RTL when Pulse Width high. Low position produces pulse much shorter than value to change to RTL. High position produces a pulse much longer than RTL. So all should work as advertised. I have no r
Read more…Google Maps (in a laptop) will cache the last viewed map with detail as fine as viewed. Then you can go to a location with no internet and view the cache (versus the real internet data). This would be a great feature for Mission Planner since somet
Read more…New ArduPilot2.5+, never flown, only connected with USB and board has been working flawlessly for 4 days while I learned Mission Planner and browsed the code. Today I got the error "Upload succeeded but verify failed: exp C got 14 at 0" when uploadi
Read more…I cannot get the compass test to work in Mission Planner.
The mag is working in HUD and is enabled etc.
What am I missing? Is this a MP issue, a setup issue, a mode issue, serial, baudrade, a stupid user issue?
Mission Planner 1.2.35 mav 1.0 and Ar
Read more…