TBS Disco Pro with APM 2.6
I have started a new build, this time a TBS Disco Pro.
Wanting to know if there is anything others have had and if there are any known issues I should be aware of.
Here is my APM location.
Edgar Scott's Discussions (87)
Sort by
Restart mission again again and again and again
I can not figure out why almost every time I do an Auto flight I keep getting sent back to waypoint one if Tx signal is lost. You can see its lost signal because of the behavior on the camera.
But I changed if loss of Tx->Rx signal to do continue mis
Read more…How to configure Input Channel to move Tilt on gimbal - Please help
Here is what I have working
- APM 2.6 with GPS
- Camera gimbal is working well both Tilt and Roll
Here is what I want to have working like my NAZA-M does so well and simple.
I simply want to control the Tilt from the dial of my Tx so I can look up and down w
Read more…SplineNAV
Kevin, will you be implementing SplineNAV, that really looks great.
Just wondering, grabbed the spline branch from DroidPlaner and thought it was pretty neat.
Read more…Lost Signal with Tx, failsafe activated, then moved back to first waypoint
Using APM 2.6 & 3.01 firmware
Lost Signal with Tx, failsafe activated, then moved back to first waypoint, but I have it set to come "continue mission" and it did not.
I can tell I lost Tx signal to my Rx from my video because my landing gear came out a
Read more…Lost my 3DR Radio USB-915 Mhz "Ground" module
Lost my 3DR Radio USB-915 Mhz "Ground" module. I'm ordering a new one, I am pretty sure it wont automatically bind/connect to the air module currently on my hex.
Because I am not sure if it comes with directions, I just want to know Is there anything
Read more…Getting more distance from flights by pushing forward faster.
I know the basic things like get best lightest battery and less body weight but 'not' including those I wanted to know if I could go "further" (over trees woods property) :)
I want to get to a river at a park near me and film it.
I saw the video
"How
Read more…are you sure you want to disarm
Joysticks and arm - disarm are so close I worry I may hit the wrong one in flight - Just a suggestion for a Confirm box to prevent it falling
Read more…3 Minutes later and still downloading waypoints
I get this now and then, the waypoints take a really long time, if I unplug and replug it comes in really fast.
Read more…
Bluetooth with my Note 8
The Note 8 works great with the 3DR Telemetry radios.
But I saw bluetooth, I assume I need to get something for the APM to make this work?
I am using an APM 2.6 w UBlox GPS
It would be nice not to have the dongle off the back but somehow I am sure Bluet
Read more…Restart Mission from Andropilot
Kevin,
My mission in Auto takes off, WP and lands.
Is there a way from Andropilot that if its starting to land I can tell it to go again, basically aborting the landing and restart WP1
I heard there was a Restart in the PC MP but not sure if its in your
Read more…Battery Storage Voltage and Suggestions
My batteries never seem to last long. I quickly lose more than half flight time from a new battery,
So I just want some suggestions
If Im not flying for 2 or 3 days should I only charge to maybe 3.8v per cell then charge it up right before I leave to
Read more…MP showing battery_voltage @11.03
MP showing battery_voltage @11.03, actual pack is currently @14.5
I wanted to set my battery alarm but the voltage is not correct.
The flight only got down to 11.0
APM 2.6 with Telemetry w 3.01 firmware
Is this supposed to be the pack voltage or somethin
Read more…Failsafe question with Preset Swich
My failsafe is setup and goes into failsafe mode fine, throttle down
When I put my turn off my Tx my failsafe is setup and goes below Pwm just fine
My question is my switches also go back to a preset position throwing my Flight Mode into STABILIZE (or
Read more…Latest Pull - No Link defined 2 times
Hey Kevin, I went to check out the latest code and noticed the latest pull had an error
this was defined 2 times in the string.xml <string name="no_link">No Link</string>
I removed it and compiles fine, but at runtime still getting errors.
Should I pos
Read more…Bad "Jitter" in Gimbal
I am getting a pretty darn bad jitter, looks like a signal pulse in my Gimbal making it almost better not to use it.
It was my last flight, Im not sure if its actually getting an actual signal thats telling it to do that or not but I know its not the
Read more…Questions before I try
Hi guys, I read over the Wiki and am excited to try this with my GS3 :)
But I have a safety question or 2 before I dive in.
I read, BETA Turn your Tx On, so Ill do that
I have a 3 toggle sw set to STABILIZE|AUTO|LAND
First test with AndroPilot I want to
Read more…Take off using MP
I started this in another form, found that MP has its own disussion, sorry did not know that or I would have asked here.
I want to ask before attempting becuase I am affraid of a flyaway.
My Tx has the a 3 toggle switch set to Stabalize|Auto|RTL, All
Read more…Can I arm, take off and start mission from MP
Can I arm, take off and start mission from MP.
I can now do a mission fine from the controller, but I was wondering if I can arm the craft and start/end the mission <take off, WP, land> from MP?
Read more…