Gender
Male
About
Location
's-Hertogenbosch
About Me:
I'm a 22 year old embedded systems student living in the Netherlands who recently picked up this new "expensive" awesome hobby.
Please tell us a bit about your UAV interest
I'm interested in building and flying my own quadcopter and later on using FPV for flying.
Hometown:
's-Hertogenbosch
Activity Feed
"Thanks so much!!
It seems to be a calibration issue. I guess the calibration i did didn't work or was faulty, after following the calibration in the video all motors went on at the same time. Just took it out for a flight and it works perfectly!…"
It seems to be a calibration issue. I guess the calibration i did didn't work or was faulty, after following the calibration in the video all motors went on at the same time. Just took it out for a flight and it works perfectly!…"
"Hey i had time to quickly re-calibrate the ESC's and test the motors in cleanflight. i also double checked if the motors were connected to the right channel and were spinning in the right way. I did notice that they do not all start exactly at the…"
"Hi Crady,
Thanks for your reply :P
All motors do spin in the right direction and are connected in the right order to the flight controller. I checked this by going into cleanflight and increasing the throttle of each motor seperately and seeing if…"
Thanks for your reply :P
All motors do spin in the right direction and are connected in the right order to the flight controller. I checked this by going into cleanflight and increasing the throttle of each motor seperately and seeing if…"
Hi i recently build my first quadcopter and made quite some rookie mistakes. But i'm a bit stuck at the moment and i hope someone could help me.So after i build it and hooked it up to cleanflight i found out i had put all my motors in the wrong…
