All,
Appreciate the help here. Having quite a bit of trouble attempting to connect Mavlink telemetry over Bluetooth serial. Someone must to have tried this (run a Mavproxy GCS with the latest Dragonlink). See all the nitty gritty details here and
Read more…Background: We've got a large scale powered glider that has been flying pretty well, except for one thing that is baffling. We've done Autotune, setup and checked each parameter carefully in the list and wondering if we potentially missed somethin
Read more…All,
Had some success with APM Mission Planner based antenna tracker by following a tutorial from DIY Drones. Here's the results (time lapse video using a simulator) with links, lessons learned, and other comments.
https://www.youtube.com/watch?v=-3
Read more…Has anyone figure out a way in Mission Planner to control channels 9-12 with a Joystick? It appears as though one can only configure Channels 1-8. I'm running it with Copter v3.3 and trying to control a brushless gimbal on channels 10 and 11. I've go
Read more…All,
Before I go out and buy a brushless gimbal that I'm stuck with and is incompatible I'm wondering if people out there have a working configuration already.
I've got a Raspberry Pi camera which weighs in at single digit grams, so it doesn't have to
Read more…Hey all.
Running a Dragonlink UHF radio system on my QAV540 quad, having some interesting range issues that I never thought I would using such a powerful system! My radio is a Taranis X9D.
Everything is setup, bound and calibrated properly accordin
Read more…All,
Had a flight yesterday with virtually no changes from the previous day (with successful flight) on the same flying field here in San Diego. Notably this time I started receiving erroneous data on my OSD (mavlink messa
Read more…All,
Had a flight yesterday with virtually no changes from the previous day (with successful flight) on the same flying field here in San Diego. Notably this time I started receiving erroneous data on my OSD (mavlink messa
Read more…I'm having issues with the HUD overlay jittering.
The Roll Overlay on HUD in Mission Planner 1.3.33 jitters when a video overlay is put in the HUD.
Someone even has an example of this on YouTube.
It does this both using a USB capture device with anal
Read more…I'm using ArduPilot Mission Planner 1.3.32 on a Win 7 PC. My autopilot is running ArduCopter v3.3.
I'm streaming a an MJPEG video to the Mission Planner HUD, which causes a jitter that never stops. If I roll the quad, it makes it much worse. It als
Read more…