i just had my copter flying with new pros and motors. It was a littlebit twitchy, so i did autotune which workted like a charme! The copter was very very well flying. The only thing was, that there was a slight drift (really not that much...) bu
i have a strange problem with my copter: it flies just great in stabilize mode and it stays on point pretty ok when using poshold. Now the strange thing: whenever i have it in poshold or alt hold and move the copter in any direction it will drop
i just builded a new copter, with a Pixfalcon (soft v. 3.3.2 Pixhawk clone). I does very well. but one thing is not working well: Alt hold does not really hold the altitude - at least whenever the copter is moving. It is really strange. when i put
a week ago my Copter Running a Pixhawk clone and Firmware 3.2.1 dropped out of the sky. It ran beautifully but suddenly it just fell out of the sky. I checked The Battery Life and it was not the fault.
this is my first Blog post here. I am writing this because i was not able to find a lot on how to add an alexmos controller to the Walkera G-3D Gimbal (other than there is a mysterious guy called "Mat Kimm" who sells "tuned" Walkera Gimbals
i am planning to build a boat with a steering servo wich is capable of endless rotation. Is there any need for a "mid" position of the servo while driving? Or is the PID (+gyro/accel) enough to determine where to steer?