HI,
I am searching for a RC Zoom Control for a Sony Camera. I am not able to find it.
Similar to this one, but this one is not available anymore: http://www.smartfpv.com/store/cameras/16-rc-zoom-controller.html
Read more…Hi,
I need to setup 2 small cameras with different lens in the nose with pan tilt servo gimbal, I found I can only fit the nano cameras to get 220 degree pan and 100 degree tilt. Here is the camera, have anyone tried it: http://hobbywireless.com/mini-
Read more…Hi,
I want to build an Powerful antenna tracker with the pixhawk and mission planner. The tracker should do 360 degree.
I have 3 big antenna, and the system to pan is around 6kg and the tilt is around 3kg.
I have few questions:
1- Can a servo do unlimit
Read more…HI,
We are still using the famous minimOSD but it's very old compared to other new OSD of other APs.
Is there any other alternative or anyone working on a new robust OSD that we can use with Pixhawk.
Read more…HI,
Is there a standard PID parameters for the Talon with the wing extension which work on every Talon?
Will the weight affect the PID parameters? Example a 3kg Talon or 4Kg or 5Kg, more batteries of course.
Using the Pixhawk and Ardupilot 3.5.0
Read more…HI,
I am searching for a solution where we select a moving target and the Gimbal will follow it regardless the copter/plane movement.
Till now, we need 2 operators, one for the copter and the other one for the gimbal to follow the moving target, but i
Read more…HI,
I am building a new mapping solution, I am a searching for the right camera, I have been advised to select full frame camera like those below and also some users told me about those following inexpensive cameras:
The Sony NEX5
Canon S100 and SX260
Ca
HI,
I have a request to build a copter which can handle 8Kg extra payload for a flight duration of 40 minutes.
The project is for the Local Search & Rescue Team to find the missing and lost people in the snow and mountains. The payload will be 2 ways
Read more…HI,
I am new member in the X-UAV Talon club, I have just received my Talon with the extension wing.
I'm working to put the right combination of motors, prop and batteries:
I am looking to have the maximum flight duration over 90 minutes.
The weight of
Read more…HI,
I am building a twin motors plane.
I was searching if I have to set up the motors to spin in same directions or opposite directions.
I was reading that if they will be in same directions, the plane will go a little bit in the same direction of th
Read more…HI,
I have a cruise fixed wings plane, my motor is 550w and it consumes around 10A on a 3S battery.
But I have few questions:
2- If I want to compare 2 batteries: 3s 11.1v 6000mah an
HI,
I want to use to a Joystick with the mission planner, can I use this one:
HI,
I have a fixed plane and APM 2.6, and I have a mission plan that should go for few km, do few circles then coming back to home. (Maximum 10 waypoints).
Do I have to upgrade to pixhawk to ensure a safe flight or the APM 2.6 will be able to do it ea
HI, I am using the APM 2.6.
I have some questions regarding the plane speed and the air speed
I have a plane without an airspeed:
If the plane is defined to fly from a waypoint to another at speed 45km/h and if the wind speed is at 30km/h, at what spee
Read more…HI,
We are doing a test flight for more than 30mi, (15mi both ways). But we wanted to check the Elevation graph in the mission planner but we were getting the message that the distance is too big or too low waypoints.
We have added multiple waypoints t
HI,
Is there a way that we can configure the ardupilot to follow the terrain topology, example:
I am at 0 altitude, and I have created a waypoint 1 at 30 meters and a second waypoint 2 at 30 meters also, but between them there is a high hill at 50 met
