About

Gender

Female


Location

Mattituck, NY


Please tell us a bit about your UAV interest

Drone tech. as it pertains to manned flight.


Hometown:

Mattituck, NY


Activity Feed

Justine Haupt updated their profile
Aug 14, 2021
Justine Haupt commented on Chris Onyando's blog post Real Motion Cockpit - Ride inside your Drone!
"Re: Uncoordinated flight.
Yes, it would be fun to have motion associated with the flight but one would be very limited in regards to simulating realistic flight forces on a multirotor.
With a motion simulator for a fixed-wing plane you could at…"
Sep 6, 2013
Justine Haupt commented on Justine Haupt's blog post 3D Printed Modular Quadcopter
"> I am working on something with close to the same intention where I can have more things covered and protected. 
Neat. Protection would be nice. I'm trying to think of how it might be made rain proof.
>Wondering how heavy is your setup?  Curious as…"
Aug 23, 2013
Justine Haupt commented on Tom Mahood's blog post A composite folding H-quad
"This is GREAT."
Aug 22, 2013
Justine Haupt commented on Justine Haupt's blog post 3D Printed Modular Quadcopter
"Max size: The arms are split into two parts, and they're about 170mm long and 40mm wide at the widest point. I can get two complete arms on the 200x250mm built plate on my Makergear M2.

Brandon, thanks! Right now they detach with two machine screws…"
Aug 21, 2013
Justine Haupt left a comment for Jim James
"Hey Jim, can't find the original comment but I'm using a Makergear M2, printing PLA."
Aug 21, 2013
Justine Haupt commented on Justine Haupt's blog post 3D Printed Modular Quadcopter
"Wow I'm glad people like it.
Flight times: Rather terrible right now. I haven't flown continuously for long enough to time it accurately but I'm pretty sure it's in the 4-5 minute range with a 2.2Ah battery. I wonder just how far away it is from the…"
Aug 21, 2013
Justine Haupt posted a blog post
I've been working on an accessory-cage based quadcopter design to have a modular way of adding and removing components. The intent is to avoid the rubber-band and tape method of attaching components to the airframe. The accessory cage is comprised…
Aug 20, 2013
Justine Haupt posted photos
Aug 20, 2013
Justine Haupt posted photos
Aug 19, 2013
Justine Haupt posted a discussion
Greetings all,I think this is my first post here, and I would like to share a design I came up with.I'm flying by manual-control only at the moment (first flights were this weekend) but my objective is to work on automated flight. Also, I've been…
Aug 19, 2013
Justine Haupt left a comment for Justine Haupt
"Can't wait to get involved, thanks^!"
Jun 22, 2013