I've bought Maxbotix MB1242 sonar and connected to i2c splitter. It shows good readings indoors, but in real flight the values jumps between 0 and real values as on screenshot.
My initial thought was that the problem is in vibrations, so today I at
Recently I've made a very simple remote trigger for Xiaomi Yi camera on my drone so I can take pictures using my RC transmitter.
I have Pixhack (a Pixhawk clone) flight controller which has not only servo outputs, but also "relay pins" which basically
I've tried to modify MinimOSD-Extra to show me current APM Copter 3.3 status message on screen. The problem is that I get only couple of messages at startup and then it stops.
This is how I approximately do it:
we've got -15 today and since the weather is very calm I tried to finally run autotune on my newly built quad.
I have the following failsafe settings for my 5000 mAh 3S battery:
* FS_BATT_VOLTAGE = 10.5
* FS_BATT_MAH = 1000
I warmed up battery before