In just a short while, ArduCopter 2.7 will become available for download in Mission Planner. As we worked on ArduCopter 2.6.1, we saw that it had several new and compelling features (as well as many bug fixes and improvement) so it was decided to
Ciao a tutti! Mi piacerebbe che ArduCopter potesse fare queste cose, ora lo propongo al dev team ma so già cosa mi diranno, ArduCopter nasce come sistema di volo stabile, bla bla bla etc etc etc... :-( Mi scuso per la qualità del filmato ma la compat
Hi all! I try to using a MTK3329 gps with another fc board for comparation test, unfortunately,this boardonly accepts"standard NMEA"at "38400baud"by default(and notbinary),Iflashed thegpswith the original firmware, butunfortunatelythed
Hi all! Inside the "define.pde" i've found "#define OCTA_QUAD_FRAME", but i never found the connection to APM of the 8 motors in this configuration. I try to convert my heavy Octo-X to Octo-X4".
Hi all! After some pid tuning, but require further adjustment, today i made the first real flight with my "heavy ArduXOcto", i open this thread for sharing my experience if someone else wants build a similar "heavy configuration" using ArduPiloltMeg
I've found stange problem, i try to explain it. I've octo drone, i download V2.0.54 from the download area, change in config ONLY the frame type (OCTA_FRAME), then upload to the board with Arduino. When i connect in APM i see stranger altitude variat
Hi all! When i release the yaw stick before a little correction my octo going up (see video), i don't know why, i'm in "stabilize mode". Firmware is "2.049", PID "Stabilize Roll/Pitch" to 1.01, all others are default, this is the first video in "stab