Gender
Male
About
Location
Bielsko-Biala
Please tell us a bit about your UAV interest
uav.org.pl
Hometown:
Bielsko-Biala, Poland
Activity Feed
As a test of my new 3d printer (XYZprinting.com - DaVinci 1.0A) - prototype of simple 2-axis gimbal for ortophoto dedicated to Tarot 6xx series mount (10mm dia tubes, 65 mm distance).Only: 3 parts + 2 motors + 2 bearings + STorM32 + few bolts.Ready…
"GPS + Arduino + few lines of code."
"What about camera mount? Stabilized 2D/3D? Pitch, roll, yaw angles of photos?
Wiat software used for ortophoto production?"
Wiat software used for ortophoto production?"
"Hello Pit,
IMHO problem has "opposite" direction :)
If your OSD will accept MAVLink (via serial and/or CAN) - you increase sale of OSD by thousands %."
IMHO problem has "opposite" direction :)
If your OSD will accept MAVLink (via serial and/or CAN) - you increase sale of OSD by thousands %."
"Hi,
normally using time (shutter) priority so f-stop depends on light conditions"
normally using time (shutter) priority so f-stop depends on light conditions"
"OK.
I will try do do it today evening and will let you know about results.
My mail: marekm (at) hhot (dot) pl
M."
I will try do do it today evening and will let you know about results.
My mail: marekm (at) hhot (dot) pl
M."
"Latest version of MissionPlanner have already elevation graph based on srtm module (in case when Google altitude is not available), but still 50 km limit is present.
Only change you need is to replace "50000" in ElevationProfile.cs line 186 to…"
Only change you need is to replace "50000" in ElevationProfile.cs line 186 to…"
"You can use "srtm" module from MissionPlanner source-code and prepare elevation graphs as long and as dense - as you need.
(MissionPlanner/ExtLibs/Utilities/srtm.cs)"
(MissionPlanner/ExtLibs/Utilities/srtm.cs)"
"Small STM32F103 module: PWM from APM -> TTL serial (MGL protocol) -> RS-232 module -> MGL Servo.
Also working as "false" RC receiver - delivery PWM to APM inputs ( mode selection, etc)"
Also working as "false" RC receiver - delivery PWM to APM inputs ( mode selection, etc)"
"Sample foto from 850m AGL (jpg compressed 50% from RAW file)"
"Great,
I am sure, that Pixhawk will work ok with LSA plane. What kind of servo you plan to use?"
I am sure, that Pixhawk will work ok with LSA plane. What kind of servo you plan to use?"
"Sample log file:
- in Auto mode only roll stabilisation by APM. Elevator and throttle - hand controlled, rudder - fixed position.
- turns - by hand. During turns auto mode active, but power (+12) to servo switched-off.
Suggestions for tunnig -…"
- in Auto mode only roll stabilisation by APM. Elevator and throttle - hand controlled, rudder - fixed position.
- turns - by hand. During turns auto mode active, but power (+12) to servo switched-off.
Suggestions for tunnig -…"
"Some more photos.
To interface module - 2 additional displays (LCD) possible connection: one is 2x16 char as a Mode and Trim display (+ 6-position rotating mode switch, + 2 trimm switches - +/- pitch and +/- roll), second 320x240 touch screen as a…"
To interface module - 2 additional displays (LCD) possible connection: one is 2x16 char as a Mode and Trim display (+ 6-position rotating mode switch, + 2 trimm switches - +/- pitch and +/- roll), second 320x240 touch screen as a…"
Hello,after a few weeks of work - APM 2.5 with interface modules for 2 MGL Servos was installed in real plane VL-3 (ultralight). Rudder - fixed position, throttle - controled by "man" pilot.Main purpose - as a help for pilot to fly ortophotography…
"Simple mount camera lens down.
Sample - my last "production" with heavy camera PhaseOne iXA180 - http://youtu.be/6eORTnID8G0"
Sample - my last "production" with heavy camera PhaseOne iXA180 - http://youtu.be/6eORTnID8G0"
