About

Gender

Female


Location

Manila


About Me:

I'm currently doing our thesis about ArduCopter for Traditional Heli. I'm working with Jonathan Diaz, Nicole Marcelo and Crissangelo Pagal.


Please tell us a bit about your UAV interest

For thesis purposes. using the following specs: 1x Futaba s9257 digital servo (Tail servo) 40amps hobbywing Platinum ESC Hobbywing 8amps UBEC Turnigy 8x receiver Copter X 450 KDS 800 gyro(to be replaced w/ Futaba gy401) HMC5843 magnetometer GS407 U-Blox5 GPS


Hometown:

Manila


Activity Feed

Marianne Antonio replied to malcolm churn's discussion ArduCopter Traditional Heli (was: "600-size heli")
"Hi! Any news with the arducopter? Left our heli at school for the display so we cant do some testing yet. "
Dec 22, 2011
Marianne Antonio replied to malcolm churn's discussion ArduCopter Traditional Heli (was: "600-size heli")
"I have a problem with the current code from the GIT. The collective, pitch and roll of our heli is limited but when in CLI the movement is okay. Any ideas?"
Nov 17, 2011
Marianne Antonio posted a discussion in ArduCopter User Group
How would you know that your IMU is busted? We sometimes have a wrong readings for the attitude of the helicopter. Do we have a software to test if the IMU has a problem?
Oct 30, 2011
Marianne Antonio replied to Toby Stein's discussion Did I blow my outputs?
"Hi! When this is done, would that also affect the inputs of the RC?
 
When the APM does not have an output, what steps do we need to do to revive it?"
Oct 28, 2011
Marianne Antonio replied to malcolm churn's discussion ArduCopter Traditional Heli (was: "600-size heli")
"Anyone tested .49? We have a problem with the yaw. The heli spins. We saw that the yaw doesn't compensate when in flight mode but then in CLI the yaw seems to be working. Inshort, the motors is in reversed mode. Any idea?
 
we are using gy401, with…"
Oct 26, 2011
Marianne Antonio posted a discussion
I'd like to change the longitude and latitude values shown in the HKGCS to decimal point only. How do I do that?
Oct 19, 2011
Marianne Antonio posted a discussion
Hi! I just bought a camera, (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=...), unfortunately I thought that the video will be received by the xbee so that it will be read by the GCS.So now, we have to buy USB Capture Card,…
Oct 14, 2011
Marianne Antonio left a comment on ArduCopter (traditional heli) user group
"Has anyone tried the latest code? We wanted to try it for stabilize and loiter. Hopefully with navigation. Would there be a problem in flying the latest code with waypoints?"
Oct 13, 2011
Marianne Antonio commented on Toby Mills's blog post What is the maximum range of an Xbee? - Lets find out...
"Is the xbee rpsma 900hz is sensitive? We already have two xbee broken. :("
Oct 11, 2011
Marianne Antonio replied to Marianne Antonio's discussion Sonar Maxbotic EZ0 and Barometer in ArduCopter (traditional heli) user group
"Here's our graph during the last flight. the sonar looks good but the barometer is not right. sonar-baro.jpg"
Oct 5, 2011
Marianne Antonio posted a discussion in ArduCopter (traditional heli) user group
We still dont have the same result from the sonar and barometer. Also, we tried testing the sonar via getting the signal from the sonar using the oscilliscope and comparing the result to the actual distance but the result is different?
Oct 4, 2011
Marianne Antonio posted a discussion in ArduCopter (traditional heli) user group
Anyone tested on the new code?
Sep 21, 2011
Marianne Antonio posted discussions
Sep 20, 2011
Marianne Antonio replied to Helldesk's discussion MB1000 LV-MaxSonar-EZ0 vs. MB1200 XL-MaxSonar-EZ0
"how do you test the accuracy of the sonars?"
Sep 20, 2011
Marianne Antonio replied to Marianne Antonio's discussion Trex 450 Testing in ArduCopter (traditional heli) user group
"I edited my post. Maybe you got confused with my previous post. The first video has two power source. We saw the movement of the swashplate which is really bad so we connected it to the mission planner, thus the second video. After that, we tried…"
Sep 16, 2011
Marianne Antonio posted a discussion in ArduCopter (traditional heli) user group
Hi guys! We have an update with all the problem that we had last time. We tried all the possible connections for our heli before our test flight again. Here are the videos. http://www.youtube.com/watch?v=6_AcxHYsHUU -> power supply for servo&engine…
Sep 15, 2011
More…