Hello, I hope you can help!
I need a little help with the IDE, the Config.h file seems to be locked (all other files are locked not just config) and will not allow me to remove or add the // or change any information, have I changed a setting by acc
Read more…Hello I'm Looking for a little help with the option for using the mission planner for the Arudcopter code,
I'm following the manual here:
http://code.google.com/p/arducopter/wiki/AC2_First
I have the com port set to the correct one in the mission pla
Read more…Hello, I hope someone might be able to help or point me in the right direction,
When running a test in the CLI on the Oilpan the roll and pitch figures will start at odd figures after the ADC calibration has finished. For instance the roll will show
Read more…Hello to you all
I have run into a small issue with a new MTK in the set up testing, I have tried to search the forums for the answer, seems like the search is down still :(
I have a solid blue light on the unit, so lock I believe is happening, when
Read more…I have now done a few good test flights where I'm very happy with the way the APM & airframe have done just as asked!
I have been flying very close by and watching its every twist and turn, I now wish to push out the distance being covered.
When plann
Read more…Hello to you all,
I have been giving some thought to using the aeromaster as a UAV, has anyone built the kit, know how much room is in the fuse or know of any good reason not to use this airframe?
My thinking is along the lines that this plane shou
Read more…Hello to you all,
I have run into an issue with the auto flight mode, when I put the plane into auto mode the plane will turn towards the first waypoint but will start to descend (approx 50 meters up at that point). I had let the plane go as long as
Read more…Hello, I'm looking for a little help / guidance with wireless telemetry.
I would like to add the wireless telemetry to my APM to use with the GCS, as I live in the UK I can't use the Xbee 900's as this is the band used by the mobile telephones here.
Read more…Hello,
Just down loaded the new CODE, removed the "//" for the gps and tried to compile the code for the APM and got this screen:
This mesage came up in the red box at the bottom of the page:
ArduPilotMega.cpp:20:77: error: AP_ADC.h: No such file or
Read more…Just seen this on the Hobby King website
Prices seem to good to be true !! Are they ?
Regards
Martin
Read more…Hello to you all,
I wanted to share a little of my experience, today was the day I moved the toggle switch from stable to fully autonomous mode on my EZ* with the APM set-up.
I’ve had a few set backs with APM hardware not working correctly, this only
Read more…I have just been reading about this latest hack on the Kinect, looks interesting :)
http://www.ubergizmo.com/15/archives/2010/12/kinect_turned_into_a_quadrocopter_radar.html
Read more…
Hello to you all, I hope you can help as I have encountered an odd problem (to me), I have install the APM in my easy star, when I started checking that the control surfaces were all acting correctly (stabilisation mode), i.e.: nose down elevator up
Read more…I found this website while looking into a few ideas I'm playing with at the moment (not sure if anyone else had posted about this before).
If you head down towards the bottom of the page (first link below) you will see some photos from the early flig
Read more…Hello to you all!, This is my first post, I hope that I'm asking in the right section.
A little backgound info on where I'm up to with my build:
I have APM + Oilpan with GPS up and running, all test programs have been run and work great, now looking
Read more…