as of 1.0.96, the planner now used .net framework v4, make sure you have it installed.
i thought i might do a post on some feature that most people may not know about. so here goes.
1. HUD, if you double click the hud it will popout, allowing you to run the hud full screen, on a seconds screen.
2. Tuning, if you enable tun
Had a Perfect flight today with very repeatable results. Very happy.
I have attached a a kml of the programed flight plan, the actualy flight in kml and the log downloaded from the APM.
Im running fairly high navigation gains and lower roll gains, a
This is a high wing Trainer running on 6s and weights in at about 3kg.
Here is a kml log of the flight including a flight though and plane orienation.
The programed flight path
I also have a video of the entire flight, bu
Ive created a program that emulates a MTK gps from coords received from Xplanes.
So you connect a FTDI cable to the gps com port on the mega, and the program sends MTK binary messages to your APM. Its included in the latest ArudpilotMegaPlanner 0.4.6
The picture above is of the setup i use to test.
All the servo input signal wires are connected to the same row on the breadboard. and connected to ground
the Servo tester is pluged into the control channel to pick MANUAL, FBW and AUTO
The green cable