Nicholas Bratton's Posts (2)

Sort by

250 FPV Racer using Mini APM

3689678404?profile=originalHi All, here is my 250 FPV Racer I designed and 3D printed. It uses a mini APM as the flight controller and also has a GPS and telemetry for missions. The arms are 15mm carbon tubes with SN20A esc's in the arms. The files can be downloaded here http://www.thingiverse.com/thing:1256900

3689678422?profile=original

3689678447?profile=original

3689678464?profile=original

Telemetry/OSD board at the top, Mini APM in the middle and PDB at the bottom. 

3689678479?profile=original

688g AUW with 4S 2200mah battery

3689678370?profile=original

483g with GoPro and no battery. 

3689678522?profile=original

367g without battery and GoPro

BOM:

Flight Controller

http://www.hobbyking.com/hobbyking/store/__74644__Micro_HKPilot_Mega_Micro_Sized_Flight_Controller_and_Autopilot_with_Leads_2_7_2_APM_.html

PDB

http://www.hobbyking.com/hobbyking/store/__74645__Micro_HKPilot_Mega_PDB_BEC_and_Volt_AMP_Sensor_30_5mm_Mounting.html

Telemetry

http://www.hobbyking.com/hobbyking/store/__74651__Micro_HKPilot_Telemetry_Radio_Module_with_On_Screen_Display_OSD_unit_915MHz_.html

XT60

http://www.hobbyking.com/hobbyking/store/__49828__Black_XT60_Male_5pc_.html

Battery Buzzer

http://www.banggood.com/Wholesale-1S-8S-Li-po-Battery-Voltage-Tester-Checker-Indicator-Monitor-Buzzer-Alarm-p-26049.html

5.8Ghz Transmitter

http://www.banggood.com/Eachine-ET600-5_8G-32CH-600mW-Super-Light-Transmitter-p-974640.html

ESC's

http://www.banggood.com/DYS-SN20A-Mini-20A-SimonK-ESC-OPTO-2-4S-20-500Hz-for-Multicopters-p-974637.html

Motors

http://www.banggood.com/Sunnysky-X2204-2300KV-Brushless-Motor-CW-CCW-For-RC-Model-p-952075.html

Props

http://www.banggood.com/Gemfan-5x3-5030-Carbon-Fiber-Multirotor-Self-Lock-Propellers-CWCCW-p-972016.html

Read more…