I want to buy a Quadcopter with Ardupilor, or Pixhawk as the flight controller, and with Turnigy 9x receiver (i already have the trasmitter) which is RTF (ready to fly), or ATF (almost ready to fly). This means i won't have to do much assembling.
I di
Hello. I would like to enable various functionalities of the auxiliary channels, for example channel 7 and 8. I go to the Mission Planner and i set the Aux channel 7 to do a flip.
On my Rc Transmitter (Turnigy 9x) i have set a stick for channel 7 func
Read more…I have the APM 2.6 board. I want to power an external device (an MCU) using the telemetry port pins (which is basically a UART interface). The Vcc pin of this is rated at 5V, as i see with my multimeter. The MCU i want to connect is rated at 3.3V so
Read more…Hello. I did the compass motor calibration various times and checked the results.
I have APM 2.6, external compass + gps module UBlox Neo-6M, turnigy plush 12Amp ESC's, and a 2.7Ah battery. The apm is mounted on an anti-vibration stand on the top of t
Read more…Greetings. I hope this is the correct category for this post.
I've recently assembled my quadcopter. I have APM 2.x with external compass + gps module, namely Ublox Neo-6M. When i connect the APM to the pc through the usb port, it powers the receiver
Read more…