Hello,
My HL octo is flying great with APM2.6 (w/ 3DRuBlox w compass) and AC3.1.5, but I have challenges in loiter. I can take off and enable loiter. Then the octo will stand perfectly steady, for lets say 5 minutes. Then I land, disarm, arm, and take
Read more…Hello,
I have been flying AC2.9 on my QAV500G for a while. It works great. I now upgraded to AC3.1 and suddenly I get very high frequency oscillations in roll (low amplitude). If I reduce my P-gains drastically the oscillations disappears, but then th
Read more…Hello,
I just upgraded to using external compass on my QAV500G. I use the APM2 and AC3.0.1 together with the 3DR external compass. When trying to calibrate I get an error message and thus I am not able to perform the calibration. I include a "print sc
Read more…Hello,
We are in the process of fine tuning a large octo and a small tricopter, both using Arducopter 2.8.1. We have challenges with the loiter and RTL mode. In one flight loiter can be perfect, and then, after flying around, the multicopters don,t wa
Read more…Hello,
I am really happy about the speech function in the Mission Planner. I am using a bluetooth ear piece to listen for warnings while flying. As the APM2 is a safety device for bringing home my Octo if the primary rc link fails, I would really lik
Read more…Hello,
I have tuned my Octo earlier with no problems. I changed motors to AVROTO and now I was going to tune it again. I discovered that the P-term in Stabilize Control PID was greyed out, and the value is as low as 0,0010. I am not able to change the
Read more…Hello,
I have been reading about the simple mode with great interest. I wonder how I could use it in order to obtain full pan control on my octocopter (http://vimeo.com/52748327). I would like to control the octo in simple mode, while a camera guy co
Read more…