I am using Mission Planner v1.2.12 mav 1.0, with ArduPlane 2.65 (latest code base). I am getting an empty 'Flight Data' screen (I have connected to maVLink and everything else is Ok).
I have attached the screenshot of this, and turning out to b
When using APM planner to upload the code onto the board, it flashes the complete flash memory to re-write the contents. But, when we do calibration of radio/ servos in the mission planner where are the settings stored precisely ? (This is do
I was contemplating on the difference between the original ATmega2560 board (shown in blue in the diagram) and the main controller board that comes part of APM-1 (which is in red). I see this this APM-1 red board DOES NOT have a USB cable att
I am using ArduPilot Mega v1.4 board for ARDU-PLANE. (This comes with ArduIMU + controller board already soldered). I have attached a servo to Ouput pin 2 (for reading pitch of flight). I have powered the controller via the USB and servo via a 5V