Hi all,
I would like to present my new UAV project based on the ATMEGA 1280 and Arduino language. On the autopilot there is the ATMEGA 1280, a 5V and 3.3V regulator, 4 low pass filters for the IMU, 4 connectors to motor/servos and connectors to the t
Read more…This is the new Tumba-Quad-Q240 "Wanze". The max. dimension is less than 10 inch.
The copter was designed for the International Micro Air Vehicle Conference IMAV 2012 last week. Ranking: 3rd, 2nd, 1st, 1st together with the hexacopter "Bolt".
Overview
Read more…Here is my new quadcopter. The max dimension is 185 mm (tip to tip).
The video from the first outdoor flight is shown here: https://www.youtube.com/watch?v=Un_guPJ1Qoc
Some details:
- weight 170 gramm
- propeller AirAce 3-blade left/right, motor Hacker
Dear all,I plan to build a 30mm x 50mm Autopilot with ATMEGA 1280. Some details:- 4 analog pins to read 2 ADXRS610 and 2 axis from ADXL322 (each roll and pitch).- I2C to read a HMC6352 (yaw).- ISP- flash at UART 0- radiotronix tranceiver at UART 1- G
Read more…Here is me first flying Arduino - Mini Quadro Copter:- Take off weight 180 Gramm- Achsis center distance 155 mm- Propeller GWS 6x3 3-blade left/right- Motor Robbe Roxxy 1815-25- Controller Hype 6A in the arm (not modfied = PPM)- 2 cells LiPo 800mAh-
Read more…