HelloWould this be a useable place to glue it on my plane? (If I could do it like this, I do not need to 'destroy' (cut in) my plane...My plane is a hk reaktor epp, a 80(?) cm '3d' plane of hobbyking.Wouldn't all the possible problems be solved by th
Read more…hello
when switching to stabilize, the throttle ( and also the elevons) lowers, the throttle lowers to half!!!!!
I can't find it in the parameter list:(
another serious plane: the steering output is much lower when switching to stabilize:(
can anyone ple
Read more…hello
I have setted up the stabilisation correctly I tought:)
on the ground everything seemed to be perfect, but in the air, when switching from manual (good) to stabilize, the plane moves to the ground, some fast shock, ok till that, a little bit stee
Read more…hello
after setting up my elevon correctly (thanks again!!!!), the motor doesn't turn when moving the stick:(
plugging in a lipo does react in one beep from the motor ( no two beeps like before (I think))
but the motor won't turn (the apm showes a brown
Read more…hello
I have tested my bonsai epp with the apm 2.5 in manual mode and stabilize.
manual seems to be good, stabilize not!!
when I switch to stabilize with my throttle on half stick, the throttle lowers, and one of the elevons moves to above?!
ok with tha
Read more…hello
I am setting up my apm 2.5.
but I van't find the radio callibration tab I have load the firmware to the board a few days before)
I need this for callibration and for reversing my elevons
I can't find the screen for that (see attached file, which sc
Read more…yes I know there is alot of discussion for this subject: 433 or 915 mhz telemetry, 433 is legal in europe, 915 in the US. Me ( in europe) 'must' use 433 mhz because it's legal, but I read it has alot of interefence with the usb hub?! (with a very sho
Read more…