Hi guys,
I recently purchased this FPV frame : http://www.thanksbuyer.com/alien-bumblebee-multirotor-fpv-flyman-folding-carbon-frame-kit-w-brushless-gopro-gimbal-26528
Here is my setup :
4 x BC3536-11 750 kv motors
4 x 25A ESC
1 x 5000 mha 4S battery
APM
Read more…Another crash.. this time thanks to the 3DR power module. I used to have an external UBEC to power my APM and it was actually working pretty well. But 2 weeks ago I decided to get a 3DR power module to make things even better and have a all-in-one pr
Read more…Hi all,
Well today I went for a test flight, trying to get my octocopter under control because I have an important demo to do on Saturday for a potential client. It did not go as expected. Here is my config :
- RCTimer F1000 Cinestar Clone
- RCtimer HP4
Read more…Guys,
Really need your help here. I've been trying to fly my new Octo X8 with the AC3.0.1. Compassmot is at 30% which should be ok. Problem is that the copter spins when taking off all by itself. I had to jump on the ground to avoid collision with the
Read more…Hi guys,
I've been trying to analyze 2 unexpected RTL mode switch I had in 2 days. I was flying my octocoper with AC3.0.1 on it in stabilize mode. Flying perfectly. Then switched to Loiter, and it was ok. Back to Stabilize then it started to climb alo
Read more…Hi guys,
I need some help with a Freefly 360 modified servo for the tilt axis that I use with an external pot. I'm using the Rusty's gimbal with the 5k external pot (PEC pot) on the tilt axis. From the servo, I got 2x3 wires coming out. One of the wir
Read more…