Firmware version: V3.2-rc9
After searching for a similar problem a few weeks ago I thought I had solved this when I found MAG 2 OFFSETs were set to zero. Obviously not!
I sure could use some help. I've flown some small missions out at the club and eve
This flight ran through the first two waypoints on its mission then went crazy. I've looked at the mission and it all looks right. Checked the things I know how to check in the logs and cant seem to find anything.
Any help would be greatly appreciated
FW 450
Pixhawk Controller
2800 75C battery
GPS, Mavlink
DJI 300 ESC
DJI 2212/920KV motors
Total wieght without gimbal and camera and battery 902 grams
Battery 231 g
Per what I read it could be 1600 grams lift weight for this set up.
Flies perfect this way no
Read more…Does the Simple and Super Simple flight modes have the altitude and position hold like some of the off the shelf quad's now have. Like the Blade and Phantom?
Flamewheel 450 with Pixhawk should deliver next week. Can't wait!
Thanks in advance for the he
I have a problem similar to this one.
http://diydrones.com/forum/topics/trouble-downloading-maps
I think the trouble is interrupting the caching of tiles with escape character. Maps appear fuzzy or blured, sometimes they won't even load at all and get
