This is by far the one i like most of all!

Views: 13401

Comment by Craig Audiss on June 14, 2011 at 7:37am
I like this design, it looks very robust from the landing gear up.  The motor location is in an interesting location, cooling will be very good for sure and the cargo bay looks huge.  Nice.
Comment by UAVOZ on September 30, 2011 at 6:56am

really good design UAV

Comment by Kevin Sanders on October 14, 2011 at 12:03pm

i like this design as well! This looks similar to the aircraft I'm building. I trying to keep total flying weight around 72 ozs. i just hope I have enough engine propulsion with the wing configuration I'm using. I might need to step up to a four stroke engine instead. Your UAV looks stable.

Comment by UAVOZ on October 15, 2011 at 3:37am

If the airframe is too heavy then no need to use high power engine. Can you tell me what type of the material used?

Comment by Kevin Sanders on October 15, 2011 at 9:56am

I built the fuselage using 12oz fiberglass cloth & epoxy resin, the epoxy resin i used takes 12 to 18 hours to cure. However, once the first layer has cured and has been sanded another layer of resin is applied mixed with microbeads. Furthermore, once the second layer has harden the surface can be sanded down to a smooth finish. This entire process took me more than a week to finish.

Now this fuselage seems to be lite in weight but after installing gear, radio epuipment, fuel tank & engine i am up to 3.5 lbs with the wings weighing around 2.5 lbs. For an engine i have installed an O.S Max La 40 with a tricked out muffler. My conclusion is that i'm really not concerned about the aircraft total weight, my real concern is about not having enough power to push...

Comment by Red Goldman on January 13, 2012 at 7:48am

What is the wingspan?

Comment by leandro soares dias on October 3, 2012 at 5:53pm

  very good  you have the design of the UAV


You need to be a member of DIY Drones to add comments!

Join DIY Drones


Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service