the scorpid-500 uav an oat controlled vtol craft - Photos - diydrones2024-03-29T00:21:14Zhttps://diydrones.com/photo/feed/tag/the+scorpid-500+uav+an+oat+controlled+vtol+craftSCORPID-500 OAT UAV 3D renderinghttps://diydrones.com/photo/scorpid500-oat-uav-3d-32010-11-28T16:26:48.000Z2010-11-28T16:26:48.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936601?profile=RESIZE_400x&width=400"></div><div><p>Here a 3D rendering picture of my SCORPID-500 VTOL UAV based on the OAT concept of Gary Gress. This design have been tested successfully in flight with a 9DOF IMU on November 2010.</p></div>SCORPID-500 OAT UAV 3D renderinghttps://diydrones.com/photo/scorpid500-oat-uav-3d-22010-11-28T16:26:44.000Z2010-11-28T16:26:44.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936924?profile=RESIZE_400x&width=400"></div><div><p>Here a 3D rendering picture of my SCORPID-500 VTOL UAV based on the OAT concept of Gary Gress. This design have been tested successfully in flight with a 9DOF IMU on November 2010.</p></div>SCORPID-500 OAT UAV 3D renderinghttps://diydrones.com/photo/scorpid500-oat-uav-3d-12010-11-28T16:26:40.000Z2010-11-28T16:26:40.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689937417?profile=RESIZE_400x&width=400"></div><div><p>Here a 3D rendering picture of my SCORPID-500 VTOL UAV based on the OAT concept of Gary Gress. This design have been tested successfully in flight with a 9DOF IMU on November 2010.</p></div>SCORPID-500 OAT UAV 3D renderinghttps://diydrones.com/photo/scorpid500-oat-uav-3d2010-11-28T14:18:56.000Z2010-11-28T14:18:56.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689937353?profile=RESIZE_400x&width=400"></div><div><p>Here a 3D rendering picture of my SCORPID-500 VTOL UAV based on the OAT concept of Gary Gress. This design have been tested successfully in flight with a 9DOF IMU on November 2010.</p><p>see: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-a-full-imu">http://diydrones.com/profiles/blogs/the-scorpid500-a-full-imu</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-72010-11-23T16:07:14.000Z2010-11-23T16:07:14.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936493?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-62010-11-23T16:07:04.000Z2010-11-23T16:07:04.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936406?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-52010-11-23T16:06:54.000Z2010-11-23T16:06:54.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936305?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-42010-11-23T16:06:43.000Z2010-11-23T16:06:43.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936208?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-32010-11-23T16:06:35.000Z2010-11-23T16:06:35.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936441?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-22010-11-23T16:06:24.000Z2010-11-23T16:06:24.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689936132?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the-12010-11-23T16:06:18.000Z2010-11-23T16:06:18.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689935847?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>Full stabilisation of the Scorpid-500 with a 9DOF IMUhttps://diydrones.com/photo/full-stabilisation-of-the2010-11-23T16:06:03.000Z2010-11-23T16:06:03.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689935913?profile=RESIZE_400x&width=400"></div><div><p>Now the SCORPID-500 OAT VTOL UAV is fully stabilised with a 9DOF IMU:</p><p>- ArduIMU+ v2 flat</p><p>- HMC5843 triple axis magnetometer</p><p>- firmware AutoStab v3.2 JLN</p><p>more infos at: <a href="http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat">http://diydrones.com/profiles/blogs/the-scorpid500-uav-an-oat</a></p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-1122010-11-16T19:28:31.000Z2010-11-16T19:28:31.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934622?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-102010-11-16T19:28:26.000Z2010-11-16T19:28:26.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934682?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-92010-11-16T19:28:21.000Z2010-11-16T19:28:21.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934921?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-82010-11-16T19:28:14.000Z2010-11-16T19:28:14.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934990?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-72010-11-16T19:27:04.000Z2010-11-16T19:27:04.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934581?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-62010-11-16T19:26:59.000Z2010-11-16T19:26:59.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934724?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-52010-11-16T19:26:55.000Z2010-11-16T19:26:55.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934285?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-42010-11-16T19:26:51.000Z2010-11-16T19:26:51.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689935005?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-32010-11-16T19:26:42.000Z2010-11-16T19:26:42.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934552?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-22010-11-16T19:26:33.000Z2010-11-16T19:26:33.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934717?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat-12010-11-16T19:26:24.000Z2010-11-16T19:26:24.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934461?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>The SCORPID-500 UAV an OAT controlled VTOL crafthttps://diydrones.com/photo/the-scorpid500-uav-an-oat2010-11-16T19:26:14.000Z2010-11-16T19:26:14.000ZJean-Louis Naudinhttps://diydrones.com/members/JeanLouisNaudin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3689934954?profile=RESIZE_400x&width=400"></div><div><p>The SCORPID-500 VTOL UAV uses an innovative design based on Gary Gress concept from Gress Aero. The Oblique Active Tilting (OAT) at 45° of the twin engines allows a full pitch control by using the induced gyroscopic moment. Today, the SCORPID-500 UAV prototype has done its first successful flights. Its flight is very stable. This preliminary prototype uses 4 gyroscopes on board and some addtionnal mixers. The next version will be fully stabilised and controlled by a 9 DOF IMU (ArduIUM v2, HMC5843, GPS, firmware TriStab v3...)</p><p>by the French VTOL-UAV team (Jean-Louis Naudin and Matthieu Bourdarias)</p></div>