P1060390

P1060390

Read more…
E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • RotorBits 580mm Hexcopter.  DT750's, Afro 30a ESCs, Turnigy UBEC, Pixhawk+Telemetry, 11x4.7 props, Hero HD, RMRC Pico 1.3gHz vTx, 5000mAh Turnigy Nano Tech 3S 35c battery.  Pulls about 25amps TOTAL in OGE hover (50% throttle), and that lasts me 9-10 minutes, using 4000mAH and results in a rest voltage of 11.1 (with GoPro and FPV).  AUW: 2.32kg.  My only change to this setup would be more reliable motors (DT750's are finiky critters) and smaller ESC's.  I really don't think 30amp ESC's are needed when I don't even pull 60amps total at WOT in Stabilize mode.  I'll probably get some pancakes and swap most of this over to a Tarot 680, swing some bigger blades, bump up to 4S, and try to get a 4:3 camera on a 3-axis to pull down 15 minute flights on a parallel battery setup.  Fun stuff!

This reply was deleted.