Preamble
  • La Vergne, TN
  • United States
Share

Preamble's Friends

  • Christian
  • DG

Preamble's Groups

Preamble's Discussions

All geotag info is the same

Started Oct 3, 2017 0 Replies

So, my first need to geotag.. Images and I thought all was fine until problems with post processing... then I notice each photo has the same exact GPS Data in its file properties...captured with a…Continue

Tags: geotag

Permit required for park flight

Started Aug 29, 2017 0 Replies

So, here in TN on Aug 21st me and the crew headed downtown to visit the festival before the Eclipse main event. Afterwards we headed a mile down the road to kill some time at the park (I just…Continue

Tags: parks, Permit

 

Preamble's Page

Latest Activity

Preamble replied to Preamble's discussion Asking for experienced advice on Tlog first flight HEX YAW IMU issue in the group Pixhawk 2 User Group
"Greg, Thanks so much for the response. I'll be posting a photo showing the level of the props, I'm 95 percent sure we are good there however.. I did go over the ESC MIN->MAX values and they were inconstant, each differ by as much a 5…"
May 16
Greg Fletcher replied to Preamble's discussion Asking for experienced advice on Tlog first flight HEX YAW IMU issue in the group Pixhawk 2 User Group
"The clockwise motors,1,3,6 are less power than the counterclockwise,2,4,5 motors. It is compensating for an inherent yaw in the airframe. I am assuming you have clamp type motor mounts and tube arms. Check that all the motors are on the same plane,…"
May 13
Preamble added a discussion to the group Pixhawk 2 User Group
Thumbnail

Asking for experienced advice on Tlog first flight HEX YAW IMU issue

First let me say thank you, I've been a Pixhawk user for several years and think the work of the FC. This is my first HEX build so obviously I put a Pixhawk 2.1 inside.This is the first flight of a new build, one which I had trouble configuring the 30amp ESC's and originally loaded CHIBIOS build on the PC trying to use pass through connection for ESC's...which did not work.So, I loaded APM back on the board... I HOPE there are no negative values left over from this????So the first flight was…See More
May 13

Profile Information

Please tell us a bit about your UAV interest
Middleton
Hometown:
LA Vergne

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service