"i am thinking about using a separate BEC to power my APM and Receiver, this way the ESC would be responsible only for speed control and would not overheat. BECs are easily available and they are also very light weight…"
"all other motors and props are same. and only this motor stops. I've interchanged the props nothing happened. If the motors were to stall any motor would randomly stall, but this is not the case here, every time the same motor stops.…"
"as i mentioned earlier in this discussion that i was having the same problem, i was also trying to find out the reasons. I guess I've found one.I was using the BEC of my ESC as all people usually do, but recently when i was studying about…"
"can we use wookong-m controller with everything else from jdrones. i mean the frame, motors, ESCs all from jdrones and only the controller with its IMU, GPS etc.
Actually i am asking this especially because of the ESCs. WKM should be used with ESCs…"
"me too had the same crashes, and today when i was trying to tune my arducopter by holding it in my hand to get a feel of the parameters i changed, i got the reason of my crashes. One of my motors stopped for no reason!!
this was not…"