"The problem was solved today, with a new and final crash... This time the plane was flying ok until I changed the flight mode to "manual" (something that I did not experimented in the last 30 or 40 flights), the plane entered in a sharp…"
"I don't see any tape on the right aileron, only on the left, so I am guessing that the left already ripped out and was fixed with tape but the right was never taped... never trust the EPO as a hinge, I always cut it away and use tape as a hinge…"
My guess is a structural fault too, but I don't see any evidence of that. I can post some pictures of the crashed airframe, but seems that all broken parts was due the ground impact.
The tlog shows a lot of data when you load the log…"
"Sorry about your crash. Unfortunately the log is not of much use as it only contains GPS data. I'm assuming it wasn't a pixhawk, hence the limitation. From the video, I my gut feel is something went wrong with the plane structurally -…"
Hi,In the last 3 weeks my Skywalker flew about 600km's splitted in 40 different missions. In the last mission when the plane finished the last waypoint and entered in RTL, the plane did a very tight turn with nose down until crash on ground.Initially I suspected from a malfunction servo, but after inspection all servos are ok.My log does not help much because is configured to log almost GPS data and not much more.I have the tlog that shows the final moment of crash.Someone can diagnose what…See More
Hi,I have a Octo with APM2.6, ArduCopter V3.2.1 , MK3638 motors and 30A Afro esc's (Simonk). This setup won't fly. The last 2 flights resulted in flip and crash (after a few minutes in the air flying ok).Today, in the first flight one motor stopped in the air and I managed to get it back to the ground safely. After landing, the motor still did not working until I restart the APM. I decided recalibrate the esc's (all at once, because I was in the filed, but previously I have calibrated one by…See More
Hi,In the old versions of Mission Planner we had the Start HIL Simulation, now I see the SITL Simulation in the Simulation Tab. That option is working?Why I don't find documentation about this method to launch the SITL? (I found just info about harder methods to get this working: SITL on Linux ,…See More
"I start to think that the issue is not just the follow me mode, but a incompability bug between Droidplanner & AC3.1 too.
Yesterday I flew a Hexa (apm 2.5 AC3.1) and a Quad (Megapirate 2.9) with a tablet + Droidplanner 2.0 (Beta). The quad…"