"thanks for the reply :)
Great to know the profile is there at least. I have some work to do on the airframe but once I've done some testing I'll let you know how it goes, maybe on a new thread.
"just dropping back in to this post to see the current status of VTOL support in the 3.2 release? Specifically tiltrotor Y6 configuration? Looking to get out of Mission Planner altogether if possible but we need that VTOL support for our…"
"Set mission safe distance to ground and obstacles in each mission parameters, instead of vehicle profile. This is annoying to change if flying low one mission over a field, then over a forest. If you forget to raise the safe AGL then it will crash…"
"1. Have takeoff and landing point be the same (optional). Right now gets error regarding too close.
2. Have default view on new mission load be down with north up (or set as you wish). The current one I have to manually reset each time I load.
we will try to investigate this incident ASAP.
please let me know which version of Ugcs for DJI did you use? Was it alfa version of Ugcs for DJI 2.13 available for beta testers? Also please let me how did you activate this "waypoint…"
"5. Have default view be Nadir and North up (or make that optional setting). I have to every time reset to this when I open a new mission.
6. Set 3D ground clearance. When going up very steep hills I find the drone, for example, flying at 50 AGL…"
"Hi, I collect .las point clouds using a laser scanner, first flying at a high AGL to ensure I don't collide with a tree crown, then fly lower to get denser understory of the forest. From the point cloud I was creating a raster geotiff to import…"
"Hi Eben, there is no possibility to load geotiff as 3D object. Only as elevation data.
What is source of your data? Point cloud as result of photogrammetry/laser scanning?
Please check may be your software can export data as KMZ with built-in…"
Yes, but that doesn't work as I would want to be - for example - 60 meters AGL on the DEM, but 20 meters AGL on the DSM. Now, it would be possible to adjust this, however the DSM has gaps in it and if I were to fly over a gap then…"