Ken Falk
  • Male
  • Denmark
Share

Ken Falk's Friends

  • Søren Møller Dath
  • Wesley Versfeld
  • Greg
  • Laser Developer
  • Randy

Ken Falk's Groups

Ken Falk's Discussions

Crash. Switch to stabilise cut all motors. Help appreciated

Started this discussion. Last reply by Ken Falk Oct 24, 2013. 8 Replies

Hi Guys,I had a minor crash today and I would greatly apreciate any help help I can get from you guys:)!I have been flying this setup without problems with about 60 minutes of total air time…Continue

Arducopter Crash - Help Needed

Started this discussion. Last reply by Innokentiy Antipin Mar 14, 2013. 29 Replies

Yesterday I had a really bad crash with my Arducopter. I'm hoping that someone can point me in the direction of what happened so it won't happen again.…Continue

Tags: Quadcopter, Crash

 

Ken Falk's Page

Latest Activity

Ken Falk commented on Laser Developer's blog post Under the hood of the SF40 smart sense-and-avoid LiDAR
"@Laser Developer, thank you very much for the quick reply. The SF41 sounds very interesting. We are working with the biggest power line company in Denmark and several of the mid size power line companies. We are open to share our experiences and…"
Jan 11, 2016
Ken Falk commented on Laser Developer's blog post Under the hood of the SF40 smart sense-and-avoid LiDAR
"Looks very promising! If I remember correctly you previously did tests with your other lidar sensors on power lines. Do you know if it is likely that this unit can pick up the earth wire (Smallest one - Approx 20mm diameter) from 30 meters distance?…"
Jan 9, 2016
Ken Falk commented on Wayne Rochat's blog post RPAS Logger Plus now supports exports and syncing with RL Enterprise suite
"Any news on when Enterprise and IOS versions will be released? It sounds like a product we would be very happy to use. Have a great day everyone:)!"
Nov 13, 2014
Ken Falk replied to Ewen Rankin's discussion One Hour Flight Times - Specs
"Hi Shaun, Do you mind sharing details about your hex setup. I have played with the 100-U8 motors in both Y6 and quad setup with Li-Ion batteries. We were not able to tune the 6Y to be stabile enough. The quad was offered much better stability after…"
Oct 14, 2014
Ken Falk commented on Rui Costa's blog post New Professional Multirotor Airframes
"Perfect! Thank you very much:)."
Jul 9, 2014
Ken Falk commented on Rui Costa's blog post New Professional Multirotor Airframes
"@Rui, Nice looking frames. Can you tell us how much each of the bare frames weigh in grams? I couldn't find that information on your web site. Thanks:)!"
Jul 8, 2014
Ken Falk replied to robincfey's discussion remote sony camera control via RM-VPR1 and any rc system HELP
"Sorry to hear that.. I have heard good things about the nex5 for aerial photography. I have a friend using that camera with this simple IR trigger in case you haven't bought one…"
Apr 23, 2014
Ken Falk replied to robincfey's discussion remote sony camera control via RM-VPR1 and any rc system HELP
"Looks nice and cheap for lenses without power zoom. Thanks for the link:)! What are your experiences with the OSS SteadyShot feature. Do you always disable it? Is it enough to disable it, or do you look for lenses without SteadyShot?"
Apr 23, 2014
Ken Falk replied to robincfey's discussion remote sony camera control via RM-VPR1 and any rc system HELP
"Hi robincfey, I have had good success with this remote shutter: http://vp-systems.eu/camremote.html I think it does most of what you need. They just added support for the A5000 with this cable: Multiterminal cable I am curious to hear…"
Apr 23, 2014
Ken Falk commented on ctech4285's blog post EPM Cargo Gripper. Simple easy method for gripping and relasing cargo on a copter
"@ctech4285, Really nice to hear:)! I hope you have great success with your project!"
Dec 20, 2013
Ken Falk commented on ctech4285's blog post EPM Cargo Gripper. Simple easy method for gripping and relasing cargo on a copter
"Really nice stuff:)! I really like that you can lift that much with only 50grams penalty. ctech4285, I have a couple of comment about PWM control if you make any revisions to the hardware or software in the future:). It would be really cool if PWM…"
Dec 20, 2013
Ken Falk replied to Eric Watson's discussion UAV Imagery Cloud Platform for Storage, Visualization, Sharing, and Processing
"Hi Eric, Sorry, I have not used the drone mapper service. However, at the moment they are the mapping solution I will try out when I need it. I like the online solution where I don't have to install on my pc or process the imagery on my local…"
Nov 14, 2013
Ken Falk replied to Eric Watson's discussion UAV Imagery Cloud Platform for Storage, Visualization, Sharing, and Processing
"Hi Eric, Sounds like a great service:). Have you checked out http://dronemapper.com? They offer something similar but without the sharing ability. Have a nice day:)!"
Nov 14, 2013
Ken Falk replied to Ken Falk's discussion Crash. Switch to stabilise cut all motors. Help appreciated
"Hi guys, I just wanted to let you know that I believe I have found the issue. One of the wires going from ESC to motor was broken. So just as you mentioned it was indeed a mechanical failure. There was a bit strain on this wire which probably caused…"
Oct 24, 2013
Ken Falk replied to Ken Falk's discussion Crash. Switch to stabilise cut all motors. Help appreciated
"Hi Again:)! Here is the youtube video of the crash in normal followed by slow motion. I can't hear if it is one motor cutting or many. Maybe you guys have better ears:)?"
Oct 24, 2013
Ken Falk replied to Ken Falk's discussion Crash. Switch to stabilise cut all motors. Help appreciated
"Hi Randy:)! Thanks for your reply. It really helps a lot that you took your time to explain how and where in the logs I can see the problems. Hopefully in time I won't need as much help the experts and maybe even be able to help other…"
Oct 24, 2013

Profile Information

About Me:
I work with cloud software for UAV inspections - www.scopito.com
Please tell us a bit about your UAV interest
We make it simple store, analyze and share data from complex UAV inspections
Hometown:
Denmark

Comment Wall (2 comments)

At 2:13am on June 18, 2013, Greg said…

Hi Ken,

Not sure how much I can help but will do if I can. I'm not yet a tycoon, just starting out at this stage.

Regards, Greg

At 2:37am on June 18, 2013, Ken Falk said…

Hi Greg,

I'm just starting out as well. I wrote to you because I wanted to ask about the insurance company you mentionen in your last blog comment. But I can see that some else already asked you that question:).

Can you tell me what kind of coverage and price your insurance includes?

Have a great day:)!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service