"I had an apm 1 that would suddenly have a hardware failure at almost exactly 3:15 from boot. The gyro would physically fail to work at exactly that time. It's possible to be a hardware issue. Keep me posted!"
"Austin, thanks for your analysis!Yes throttle was cut-off at the moment of flip by a fixed-wing habit :(But it was restored instantly. Receiver FS (not APM) was set to center sticks and LAND.I don't think it could be a gyro problem. At least…"
"Upon inspecting your logs a bit, I'm missing the crucial data that will tell me what happened, but the video you got tells a lot :) What baffles me is the drop in throttle almost exactly when the copter starts to tilt up. Did you cut the…"
"Would it be a problem for you to grab a USB cable and get a clean, non-flying tlog for me? There's a lot I can get about your current setup from the extra data mission planner provides in its log. Just pick it up, turn it upside down, 90…"
Hi everyone,Hexacopter Y6 has crashed from altitude of 100m, being in STAB mode.Setup: HKPilot 2.5, ArduCopter 3.1.3 Homemade frame Y6 SunnySky X2212 980kv Plush 18A with blheli Props 10x4.5Video and logs: on GoogleDriveLook at the end of the video at 9:20.As you can see it flew almost fine and…See More