I tried to search, but are there any lifting capacity graphs (flight time and battery calculated in) for the 3DR frame with the 880Kv motors? If not, what is the lifting capacity with the 880Kv…Continue
Hi, I have an EasyStar with the original ArduPilot. I have done a lot of test's and it flew great in all modes except the auto mode. In the auto mode it hits every waypoint like it should, but…Continue
I have a small problem with the ArduPilot when I put it in both FLY_BY_WIRE_A and FLY_BY_WIRE_B, the rudder goes almost full to the left, not all the way but say 80%. The rudder still works both…Continue
Hi, I recently bought ArduPilot with an IMU and a shield for my EasyStar.I have wired it up like the guide on the Google Code page showed. When I turn it on to test it, I can move the plane an the…Continue
I recently bought a GoPro (HD Hero2) for my EasyStar, but managed to crash it before I could mount the camera.
But I just had to see the HD footage from the sky's, so I glued the EasyStar together again.
I throw it in the air and immediately felt it was tail…
I have never had a major crash (except some stupid nosedives) until today.
After the first waypoint ArduPilot suddenly decided my EasyStar was to high, and before I could recover control it disappeared behind some tress.
It was quit a loud bang when it hit, whatever it hit.
Lucky it wasn't dead, so I could track the plane from the sound of the engine.…Continue
It apparently doesn't weigh more than 85g, can take up to 1080p and it looks like a easy camera to fit on a plane compared to a bit more bulky GoPro.