Reuben's Groups
-
Pixhawk 2 User Group
295 members
-
IRIS
835 members
-
ArduCopter User Group
3164 members
Reuben's Discussions
Camera Trigger Cables
Started this discussion. Last reply by Eric Coronel Mar 5, 2015. 2 Replies 2 Likes
Hi Guys Ok seems there is some interest in trigger cables. WHO WANTS ONE ! speak now or forever hold your peace. lol Please provide me with your camera model and your shipping address and email. I…Continue
Camera Trigger Cables
Started this discussion. Last reply by Wahono Nov 7, 2016. 3 Replies 0 Likes
Ok seems there is some interest in trigger cables. WHO WANTS ONE ! speak now or forever hold your peace. lolPlease provide me with your camera model and your shipping address and email.Regards…Continue
Copter turns before waypoint and cuts the corners.
Started this discussion. Last reply by emile Nov 25, 2014. 1 Reply 0 Likes
Hi Guys Has anyone experienced the copter turning and backing into a way point ? I also seem to have an issue with the same copter cutting the corners off on all way points on one end in my…Continue
Reuben's Page
Profile Information
- About Me:
- Village TechniX
- Please tell us a bit about your UAV interest
- Avid Rc Fan
- Hometown:
- Tauranga
Reuben's Blog
Why are some ESC's only rated to 3s or 4s Lipos ?
Posted on January 30, 2016 at 8:51pm 16 Comments 4 Likes
Here is a bench test I have done to find out if a 2s to 4s Afro ESC's can run on 6s.
ESC’s and Label Specs
Afro Slim ESC 20amp 2- 4s battery…
Top Discussions
Groups
-
Micro Drone
45 members
-
ArduPlane User Group
1472 members
-
3D Printing Drone Parts
282 members
-
Andropilot Users Group
470 members
-
3D Models
57 members
© 2019 Created by Chris Anderson.
Powered by
Comment Wall (4 comments)
Nope, still out in the cold and thinking I got scammed like everyone else.
Thanks for getting back to me. I'm trying to get the gimbal motor as close to the camera body as possible so I'm going to mount the Sony Multiterminal the same way as this HDMI plug:
http://imgur.com/a/nVEZ4
Hi Reuben I need built a somes cables for Trigger Pixhawk to Canon s100, I sew your pcb board, but the camera need mini usb cable , only will need change and soldering the mini usb cable in the board camera pins?
Hi Augusto
To make your own cable it is very easy ..just use this diagram and the parts you can use like an old usb cable or you can get one from electrical shop ..
You need to be a member of DIY Drones to add comments!
Join DIY Drones