August 2018 Blog Posts (21)

Configuring RFD868x/RFD900x Telemetry for Pixhawk 2

My previous blog of the Jetson TX2/Pixhawk 2 build includes the use of an RFDesign RFD 868x telemetry unit.  Here's the detail of how I set it up.  As usual, the post can be found at…

Continue

Added by Mike Isted on August 29, 2018 at 5:25am — 1 Comment


3D Robotics
Pixhawk-based navigation using ADS-B transponders instead of GPS

From the University of Washington:

Drones use GPS to find their way without a pilot. But GPS signals can be easily blocked by tall skyscrapers or…

Continue

Added by Chris Anderson on August 27, 2018 at 9:15pm — 3 Comments


3D Robotics
Bicopter build

From Hackaday:

RCExplorer, or [David], or just ‘The Swede’, …

Continue

Added by Chris Anderson on August 27, 2018 at 8:03am — 2 Comments

Pixhawk 2 with Jetson TX2 Build

I have just completed my rebuild of The Groundhog hexacopter with a Pixhawk2  and NVIDIA Jetson TX2 companion computer.  This is in preparation for the coding blogs I am posting and further work integrating depth cameras and machine learning.  For those interested, details of the build are posted on my…

Continue

Added by Mike Isted on August 25, 2018 at 12:00am — 15 Comments

Drone Mapping with Reach: Hot Shoe Adapter for M+ and PPK workflow overview

Post-Processed Kinematic (PPK) technique is widely used for mapping with drones. In this scenario Reach RS/RS+ base on the ground and Reach M+ rover on a drone independently log raw data which is post-processed after the flight.



For mapping, it’s crucial to sync an onboard camera and Reach M+ rover. To ensure smooth and reliable synchronization of…

Continue

Added by Emlid on August 24, 2018 at 4:00am — 1 Comment

Precision Landing with OpenCv and Aruco Markers | Part 1

Here I am again with a new tutorial. Find it on Youtube

Suggestions for further videos? >>> Write it down in the comments or on my YouTube…

Continue

Added by Tiziano Fiorenzani on August 21, 2018 at 9:56am — 3 Comments

Tersus UAV PPK solution is coming

Tersus UAV PPK solution is coming.

Tersus UAV PPK solution is available on the website now: www.tersus-gnss.com

Tersus UAV PPK solution includes BX316R PPK Receiver, AX3705 Helix…

Continue

Added by Haley Hu on August 20, 2018 at 11:30pm — 2 Comments

Task 3.1 : Biomechanical Equestrian simulation

Hello everyone,

Long time no see.

My animal-type drone research and development launched the new open institute "Varipon Institute" at Blender Network.

From now on, we will provide you modeling data of movement mechanism operating on land, at…

Continue

Added by Yutaca Sawai on August 17, 2018 at 5:30am — No Comments

Coding UAVs with ROS. Subscribing to FCU data.

I have just published Part 2 of this series, designed to develop skills in Python and ROS so as to achieve flexible control of a UAV.  It's based on a Pixhawk FCU with Raspberry Pi companion computer.  The Pixhawk is running PX4, but it would also work with minor modifications with…

Continue

Added by Mike Isted on August 16, 2018 at 12:30pm — No Comments

FlightZoomer 3 is released!

Finally, after a long development time, I am happy to announce that FlightZoomer 3 is released!

To celebrate the launch of the FlightZoomer apps, the FlightZoomer 3 Cockpit-app is available at no cost from the Windows 10 Store. Be sure to get the app for free before the price goes up.

For those who don’t know FlightZoomer yet,…

Continue

Added by Martin Rüedi on August 15, 2018 at 12:00pm — 7 Comments

F2S Instant Flight Controller, GPS, OSD and RSSI All-In-One

This might be interesting for all.. I spent a few weeks with the F2S all-in-1 flight controller, testing on a few planes and I think this is worth sharing.  Status: Unknown and underrated

  • Pros - can be installed and tested under an hour, multiple flight modes and comprehensive OSD
  • Limitations or maybe good - little…
Continue

Added by noeL on August 13, 2018 at 9:37am — No Comments

HYBRID DRONE

When you love drones as well as rovers you would want to have both of them together. Just by adding a set of wheels to my already existing PlutoX drone and with the help of some simple coding, I developed this hybrid drone.

What I wanted to do was to build a prototype that can fly and walk on the ground as well so in short a combination of…

Continue

Added by SHIVANI SALIAN on August 12, 2018 at 9:30pm — No Comments

Autonomous UAV Coding Summer School - UWE Bristol Follow Up

We recently ran a 2-week UAV build and coding mechatronics Summer School at UWE Bristol for students from the Ecole des Mines d’Ales. Great students and a great venue made for a very successful course and much fun was had by all!

Huge thanks to @UWEBristol and of course the…

Continue

Added by Mike Isted on August 10, 2018 at 2:54am — No Comments

Drone Security & Surveillance Operations Made Easy

Drones have already been in use in the security and surveillance industry, bringing a significant change in how the operations are carried out. However, most current aerial security and surveillance systems are either tied to a particular drone hardware, or need…

Continue

Added by Achal Negi on August 10, 2018 at 1:48am — No Comments

UAV GCS design notes

It’s probably time to provide some background to my blog posts on various ground control stations we’ve been designing and manufacturing, because our experiences over the years may give some food for thought for fellow UAV/USV developers.

Already in early 2010 it became clear that the multirotor…

Continue

Added by Azjeg on August 9, 2018 at 5:31am — 4 Comments


Moderator
Plane 3.9.0 stable released!

The ArduPilot development team is delighted to announce a new stable release of plane, version 3.9.0.

For those of you who have been testing the 3.9.0beta releases then you won’t see any surprises here. That are no changes since 3.9.0beta6. Also, many thanks for testing the betas!

For those of…

Continue

Added by Alexandre Mainardi (Nuvem UAV) on August 6, 2018 at 9:52pm — 2 Comments

UAVs electricity inspection work

Today I'd like to share some information of UAVs electricity inspection work. 

To ensure the stable supply of electricity, regular inspection and maintenance of the installations are important and essential. In the past, this kind of inspection work in China are mainly finished by…

Continue

Added by Haley Hu on August 6, 2018 at 7:00pm — 1 Comment

1080P 10X Night Vision Zoom Camera For DJI M200,fully compatible

Sky Eye-10NLT is one 1080P 10X night vision zoom camera specially designed for DJI Matrice 200. This gimbal is developed based on DJI Skyport, which means it is seamlessly compatible with Matrice 200 drone: all gimbal functions can be controlled through DJI GO APP and controller, like Yaw/Pitch, zoom,…

Continue

Added by yangdaonline on August 6, 2018 at 12:55am — No Comments

Monthly Archives

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

1999

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service