All Blog Posts (13,642)

3D Robotics
100,000 page views!

It took us three months to get our first 50,000 page views. It took us just a month to get the second 50,000. This site passed 100,000 page views earlier this week. How long till we get a million?

Added by Chris Anderson on September 21, 2007 at 3:10pm — No Comments

Just playing around

Work has actively kept me away from doing stuff I would really like to get into.

The main problem being a move to cover for somebody that is ill to Scotland. Initially for two weeks but thats turned into 2 months. The point, all my gear was down south.

I went and picked it all up last week so can start again.

The weather will be the problem now!!

Anyhow I will post a video from a Pentax Optio T10, taken from a hill, East Lomand just to the north of… Continue

Added by Gary Mortimer on September 20, 2007 at 11:44am — 3 Comments

3D Robotics
Turning an EasyStar into a proper camera platform

Multiplex EasyStars are one of the most popular aerial photography aircraft for a good reason: they're cheap, stable, tough and easy to modify. In an earlier post, I described how to upgrade one for better performance. In this post, I'll show you how to install a camera for great Google Earth mapping, producing high-resolution,… Continue

Added by Chris Anderson on September 17, 2007 at 9:37pm — 15 Comments

3D Robotics
Warning: Spread Spectrum R/C and 2.4 GhZ video downlinks don't mix!

In a comment on a thread at right, David Albert makes an important point about frequency clashes between spread specturm radios and 2.4 Ghz video downlink systems, such as the RangeVideo and Black Widow AV setups that we use. If you haven't been following the chatter on aerial photography newsgroups, you might have missed this (as I did). This info may save your…


Added by Chris Anderson on September 11, 2007 at 4:02pm — No Comments

Micro UAVs may be better terror-preventers...

I hope we can all contribute to the Anti-Terror war, by building UAVs, sending them into the DOD and having them take consumer research and make it into something that will protect us in return forn our troubles...

I certainly will donate some of my butterflies...

Added by Nathan Guannan Zhang on September 11, 2007 at 9:30am — No Comments

3D Robotics
Is this the miracle chipset that's going to make DIY drones easy?

Analog Devices is about to start selling a very cool-looking device: a small box that combines three-axis gyros with three-axis accelerometers, along with an embedded processor to massage all that data and deal with calibration and drift issues. Called the ADIS16355, it will retail for about $300, which isn't cheap, but when you consider what it would cost you in time and money to duplicate that… Continue

Added by Chris Anderson on September 10, 2007 at 10:38pm — 6 Comments

3D Robotics
Modding the Nitro Models 4-channel Predator

As I mentioned, I totaled the first Predator UAV, due to the combination of an underpowered motor and the marginal controllability of that design's V-tail-only steering. I spent last weekend replacing… Continue

Added by Chris Anderson on September 10, 2007 at 11:26am — 5 Comments

MY UAV project

Hi everyone, I am running a student satellite project in Pakistan. . Now I want to start a student UAV project. My aim is to develop an agriculture UAV which can monitor SALIN water in Rahim Yar Khan which is major issue for the farmers in the region. Can anyone help me with documentation for the projeect.

Added by Ahmad Usman on September 8, 2007 at 8:39pm — 1 Comment

3D Robotics
Using Pict'Earth for image processing

Now that we've got several UAVs running well, it's time to show what they're good for. Aerial photography is fun, but it's not really useful unless you can cover large areas and integrate the imagery into Google Earth. I've been stitching together images optically and… Continue

Added by Chris Anderson on September 7, 2007 at 2:59pm — 2 Comments

3D Robotics
How to mod a Multiplex EasyStar

I was reminded by the Pict'Earth guys last weekend that one of the best all-purpose planes for carrying cameras, GPS recorders and any other sort of equipment you want to test is the Multiplex EasyStar, a virtually unbreakable powered glider. Because it's made of…


Added by Chris Anderson on August 31, 2007 at 6:30pm — 62 Comments

Imagery is everything!

I have joined this group in the hopes that I will be able to learn more about UAVs. I would like to be able to utilize them in search and rescue. Often we have no good imagery or even maps of areas that we have searches for lost people. It would be great if we could get imagery from a UAV and make it available to rescue personel to assist in search efforts.

Added by Leon Herbert on August 30, 2007 at 2:06pm — 2 Comments

What model remote control extend range to 5 miles

me and my college friends built small Glider UAV with real time video camera transmission. but my remote control works only visual range. We intend to extend the uav range to 5 miles with the help of Autopilat and ground control software. can anyone help me to chose the extended range remote control. (what model RC and where can i buy this things by online or anywhere in europe.)

SOOn i will post my entire UAV project in website.

Added by alison on August 29, 2007 at 7:50am — 2 Comments

3D Robotics
UAV fly-in report

We had our amateur UAV fly-in (the world's first?) on Saturday at the Alameda Naval Air Station. Along with my own 4 UAV's, Adam Williams brought his fully-autonomous-in-training heli, the Pict'Earth team was there with their Nokia N80-carrying Easystars, RCAPA's Patrick Egen brought a nifty camera-carrying slowstik, and we had a handful of other observers, along with the PBS film crew.

Since this was done mostly for the cameras (which can't… Continue

Added by Chris Anderson on August 28, 2007 at 7:40am — 2 Comments

3D Robotics
Can open source be giving comfort to the enemy?

2005543901635491116_rs I'm posting this because I feel honestly conflicted about something that's come up. As readers of this blog know, one of my side projects is making Unmanned Aerial Vehicles ("drones") and the technology that

goes into them. Everything I do is open source, and I share much of it here. There are also loads of other…


Added by Chris Anderson on August 24, 2007 at 10:17am — 8 Comments

Hi every one i am a newby in this site. can anyone suggest me to make UAV for the RC and video transmission range of 10 miles. And good quality video camere with maximum zooming facility.

Hi every one i am a newby in this site. can anyone suggest me to make UAV for the RC and video transmission range of 10 miles. And good quality video camere with maximum zooming facility.


Added by alison on August 22, 2007 at 7:43am — 1 Comment

Traveling with your UAV

Here's a tip for you is you are traveling with your UAV using our nations airlines: Be Prepared and call ahead.

I have traveled a few times with my modified EasyGlider and FPV/UAV kit without incident. But on these early trips, the TSA did not feel it necessary to open everything up. Not so on my last trip. I returned home to find my kit in significant disarray and several items damaged. Without going into too much detail here (see my rant on RCgroups… Continue

Added by paul hubner on August 20, 2007 at 1:39pm — 3 Comments

3D Robotics
50,000 page views!

In the three months since I created this site, out traffic has steadily grown as word got out. Now we've just hit our first milestone: 50,000 page views. We have 80 participants, who have done everything from writing a blog post or uploading a video, to just submitting a comment.

How big is the natural audience for a site like this? Well, by my estimate the biggest amateur UAV community, the RCGroups UAV forum,… Continue

Added by Chris Anderson on August 17, 2007 at 7:47am — No Comments

3D Robotics
Testing heading-hold gyros

After building the gyro-stabilized camera mount and seeing the problem of gyro drift, I bought two drift-cancelling heading-hold gyros, which arrived today. I tested them both and am pleased to report that the cheaper one won!…


Added by Chris Anderson on August 16, 2007 at 12:01am — 2 Comments

3D Robotics
How to make a sub-$100 gyro-stabilized camera


[UPDATE: I've found an even better way that costs $25, is simpler and works perfectly. It's here]

Once again I started a weekend with a crazy idea and once again I had it working by Sunday evening. (Needless to say I'm not going to win any parenting…


Added by Chris Anderson on August 15, 2007 at 8:00pm — 15 Comments

3D Robotics
Details on how to build the Lego autopilot

I finally got around to doing a proper diagram of the Lego autopilot construction. I tried Google Sketchup using the public domain Mindstorms NXT objects, but before I could get very far Lego itself released all the Mindstorms NXT parts for its own much-improved Digital… Continue

Added by Chris Anderson on August 14, 2007 at 10:54am — No Comments

Monthly Archives















© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service