Robert Krogh (hooks)'s Blog (72)

Pan & Tilt for camera inside fuselage

A pan & tilt system for Skywalker / X8 wing for installation inside fuselage.

Here you have some pictures for inspiration and stl files if any should be needing this P&T.…

Continue

Added by Robert Krogh (hooks) on May 12, 2012 at 4:25am — 16 Comments

1880 mm Skywalker woodwing platform

Skywalker 1880mm wingspan.

1880 mm FPV/UAS platform - WoodWing + EPO fuselage Skywalker.

Wood + Covering film main wing.

Fuselage and tail wing are EPO material.

Made for long range fpv/uas flying with high payload

Features :

Wingspan : 1880 mm Wood and…

Continue

Added by Robert Krogh (hooks) on April 17, 2012 at 12:36pm — 8 Comments

New Model for DIY UAV project.

Hi all

I have my hands on this UAV model. The model just need the winglets before it's flyable.

 

I'm…

Continue

Added by Robert Krogh (hooks) on April 2, 2012 at 4:29am — 34 Comments

X8 flying wing

New wing from Skywalker factory >>X8 UAV platform

For those who want Long range / Long flying time / High payload the new X8 wing will get you there..…

Continue

Added by Robert Krogh (hooks) on December 13, 2011 at 11:30am — 178 Comments

Skywalker belly protection

Skywalker belly protection

Many have been asking for this belly protection for the Skywalker platform. Finally we decided to make this in big numbers so it can be available for the people who ask for it. It's made in glass fiber and only…

Continue

Added by Robert Krogh (hooks) on November 27, 2011 at 5:13am — 7 Comments

FY31 AP autopilot from FeiYu Tech

FeiYu Tech is ready to release the new FY31AP autopilot.

FY-31AP FPV Inertial Attitude Stabilizer(Basic Edition) includes :

1. FY-31AP Module

2. FYGPS (10HZ) Module (better module)

3. Related Wirings

The FY-31AP have some new functions more then the FY-21AP:

1. Can set the path fly, …

Continue

Added by Robert Krogh (hooks) on November 24, 2011 at 9:30am — 16 Comments

Eagle on Steroides

Good inspiration.

I found this bird on youtube made by a man from Norway.

4.4M…

Continue

Added by Robert Krogh (hooks) on September 27, 2011 at 8:00am — 6 Comments

Pig hunting with personal UAV

Useful tool or.....

No it'a not me! I just found it on RCG.

"We finally flew our first thermal camera flight yesterday afternoon. About 10 seconds after launch my co pilot looked at the screen and said something like, "We now have our very own predator drone""…

Continue

Added by Robert Krogh (hooks) on August 31, 2011 at 12:30am — 13 Comments

Scorpion Y6 copter FY91Q - Hold position and RTH, but

Just been testing this "new" copter.

 …

Continue

Added by Robert Krogh (hooks) on July 6, 2011 at 3:00am — 6 Comments

FPVraptor also for UAV flying

 

The new FPVraptor will soon be ready for production. Just need some small adjustments.

The platform comes in two versions: 1.6 M and 2 M version. See the first review by Ali on…

Continue

Added by Robert Krogh (hooks) on July 5, 2011 at 5:00am — 6 Comments

China copy Ardupilot mega - ½ price!

Made in China!

Don't know what to say.

Ardupilot mega IMU: 520 rmb = 80 USD…

Continue

Added by Robert Krogh (hooks) on May 18, 2011 at 1:29pm — 76 Comments

Wifi Video link

I'm testing a wireless wifi IP camera to see if it's possible to integrate in my UAV system.



 

 

 

 

 

 

 

Yes! I know analogue Wireless video is much easier and cheaper, but I think…

Continue

Added by Robert Krogh (hooks) on April 8, 2011 at 9:36am — 13 Comments

New UHF JR module for Turnigy 9X Transmitter

New long range module for Turnigy 9X 9Ch Transmitter or other JR Radios.…



Continue

Added by Robert Krogh (hooks) on April 3, 2011 at 10:43am — 13 Comments

New UAV/FPV platform

Hi All

I worked together with LanyuHobby (RC airplane manufacture) to make a good platform for FPV/UAV flying.

 

The Fuselage is made in PVC to make it very strong (Blow moulded). Very good and strong for the beatings and landings our…

Continue

Added by Robert Krogh (hooks) on March 15, 2011 at 5:00am — 32 Comments

COFDM digital wireless video system for UAV flying

Yes! Digital wireless video systems is relative high cost and of cause over budget for most people, but the technology is getting closer to what we can reach in our UAV projects. Lets hope these systems will reach prices we all can handle.

Here is a system who fits perfect in a small UAV.

Receiver case is even made with small 7" TFT screen in a nice strong…

Continue

Added by Robert Krogh (hooks) on March 4, 2011 at 6:30am — 22 Comments

URSUS EPP Platform

This great new Platform made by Marek Rokowski from Poland.





Made in strong EPP foam.

Not a RTF kit but a well cut kit made for the long dark nights... …



Continue

Added by Robert Krogh (hooks) on November 25, 2010 at 4:30am — 7 Comments

Semi Pro UAV Platform

Hi all,





Sorry guys for keeping spamming the site with all these UAV frames and platforms.

But somebody gota do it.



My newest find is the nice UAV platform are made in Asia but not Chinese made. …







Continue

Added by Robert Krogh (hooks) on November 1, 2010 at 10:30am — 13 Comments

"Skywalker" platform made in glass fibre

I know many of you people out there asked for the Skywalker made in Glass fibre or Kevlar.



I found the plane and I think it looks very much like the foam Skywalker version.



The model is made in strong GF and has a wingspan on 1.6 M.



Wings are made in balsa and the total weight is around 1 kg.



Here you have some pictures.







The foam version of the UAV… Continue

Added by Robert Krogh (hooks) on October 18, 2010 at 12:30pm — 16 Comments

Avitus company - success with first test flight using FY-3ZT Autopilot

Simon Butterworth from Avitus UAV Systems had good results in the first test flight using FY-3ZT Autopilot system.



See the test:



Avitus FY-3ZT Flight test from Simon Butterworth on…

Continue

Added by Robert Krogh (hooks) on September 5, 2010 at 3:00am — No Comments

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service