Daniel Hibben's Blog – August 2011 Archive (2)

more ramblings on the corvid

well the folding frame is done. i am currently waiting on the glue to dry on the motor mount/ nacelles, but the frame is done and folds perfectly, i made the arms a little longer then i first intended. i am hoping to get a little more stability out of it this way, the distance from motor shaft to CG is 600mm, giving a total diameter of 1200mm, yes this is a big Y6, and…

Continue

Added by Daniel Hibben on August 13, 2011 at 11:49pm — 8 Comments

ramblings about the Corvid Y6 build

i have finally gotten almost all of the materials i need to build my new Y6, cf sheets in 1.5mm, and cf tubes in 20mm id with 1mm wall, and 50mm id with a 1mm wall.

i have gotten the main box pieces cut for the folding arms and the motor nacelles and arm mounts for the design above.

all of the main parts have been glued together and seem very lite and…

Continue

Added by Daniel Hibben on August 13, 2011 at 12:30am — No Comments

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service