Emlid's Blog (26)

Introducing Edge - Advanced drone controller with HDMI video input and 5.8GHz data link

Hey everyone,

More than three years ago Emlid was born with the idea of building a versatile and powerful drone controller. We've pursued the concept of a controller that will become a primary platform for customizable drone projects when your goals go beyond the limits of traditional autopilot boards. Today…

Continue

Added by Emlid on September 12, 2017 at 2:30pm — 12 Comments

New Emlid Raspbian for Raspberry Pi and Navio+/Navio2

Hovering Navio2-powered hexa to keep you reading

We’ve recently released a …

Continue

Added by Emlid on May 19, 2017 at 1:30pm — 6 Comments

A new look on survey and mapping with Reach RS

Continue

Added by Emlid on April 27, 2017 at 9:30am — 2 Comments

Event38 integrates Emlid Reach and starts providing ready-to-go PPK mapping solution.

Event38 now offers Emlid Reach upgrade to its vast fleet of UAVs aimed on providing ready-to-go PPK mapping solution. Reach PPK enabled system is able to deliver centimeter-level accurate 3D models without use of ground control…

Continue

Added by Emlid on February 22, 2017 at 1:00pm — 11 Comments

Emlid Reach RS: field-ready RTK GNSS receiver for only $699

Hey everyone!



Emlid team is proud to present Reach RS - ruggedized, battery-powered RTK GNSS receiver. It enables centimeter accurate positioning for survey, mapping, agriculture and drones once again changing our…

Continue

Added by Emlid on January 26, 2017 at 12:23pm — 4 Comments

Community project: Autonomous Mower with Navio2 running ROS

It's always such a pleasure to find new projects with Navio2 and Reach RTK GNSS  in project category on our community…

Continue

Added by Emlid on December 9, 2016 at 7:30am — 3 Comments

Let's start Black Friday now

Don’t miss out our best deal for Black Friday! Offer is valid all over the weekend and Cyber Monday.

 

%d0%b1%d0%b0%d0%bd%d0%bd%d0%b5%d1%80

To get the discount go to our shop and use coupon code “black” during checkout to save 85USD on Reach RTK kit or “friday” to save 34USD on Navio2 autopilot.

Please note that coupon codes cannot be combined with…

Continue

Added by Emlid on November 24, 2016 at 12:55pm — 1 Comment

Tuffwing integrates Reach RTK, gets 4cm precision without GCP

3D map georeferenced with Reach GPS data.

Tuffwing, a manufacturer of affordable aerial mapping systems recently performed integration of…

Continue

Added by Emlid on October 31, 2016 at 12:53am — 4 Comments

4th of July sale on Navio2 autopilot and Reach RTK kit

The deal lasts only for 48 hours - do not miss the offer!

 

If you are upgrading your fleet to Linux-based autopilots or would like to install RTK navigation or do precision mapping - we have deals…

Continue

Added by Emlid on July 4, 2016 at 2:27pm — 15 Comments

Navio autopilot now supports Raspberry Pi 3!

For the last weeks we’ve been working relentlessly on the new revision of our special Raspbian image for Navio autopilot that supports Raspberry Pi 3. The new image works on the following hardware combinations:

  • Raspberry Pi 3 with Navio2
  • Raspberry Pi…
Continue

Added by Emlid on April 13, 2016 at 7:30am — 8 Comments

Reach RTK Pixhawk integration released!

This landing looks so good like it is a reversed takeoff video. In reality this is a demonstration of using Reach RTK integrated with Pixhawk. This feature is now available for all ArduPilot based autopilots, including our beloved Navio+ and…

Continue

Added by Emlid on April 5, 2016 at 7:30am — 26 Comments

New Raspberry Pi 3 with 64-bit cores and built-in Wi-Fi and BLE

New Raspberry Pi 3 is about to be announced, it will bring 64-bit 1.2Ghz cores and Wi-Fi connectivity. It is surely an exciting update for Navio2 and we can’t wait to get it into the air.

 …

Continue

Added by Emlid on February 27, 2016 at 1:00pm — 44 Comments

Introducing Navio2

Emlid is proud to announce Navio2 - the new version of Navio autopilot.

 

Navio was the first Raspberry Pi based autopilot and grew up to become the main Linux APM platform. With Navio APM flight stack runs directly on Raspberry…

Continue

Added by Emlid on December 14, 2015 at 8:52am — 22 Comments

Community-designed cases for Navio+ and Raspberry Pi 2

Recently several cases were designed for Navio+ and Raspberry Pi 2 by community members and we would like to share them in one blog post. Now you have what to choose from. We would also like to thank designers for their great work. So pick one you like and make sure to share the results…

Continue

Added by Emlid on July 17, 2015 at 6:11am — 1 Comment

Reach: affordable centimeter-level precise RTK GPS on Indiegogo

Hi all!

We are glad to announce the start of crowdfunding campaign for Reach -…

Continue

Added by Emlid on May 1, 2015 at 7:18am — 30 Comments

First flight of Linux APM on Raspberry Pi 2 with Navio+

Hey guys!

Today we’ve made the first flight of Linux APM on Raspberry Pi 2 with Navio+.

Navio+ is an autopilot HAT…

Continue

Added by Emlid on March 28, 2015 at 7:00am — 45 Comments

Navio+ and Odroid-C1: the most powerful Linux autopilot

Greetings!

 

Some time ago we’ve released a new version of our Linux autopilot - Navio+. Main new feature is that Navio+ supports…

Continue

Added by Emlid on January 30, 2015 at 8:30am — 37 Comments

Navio+ - new version of Raspberry Pi autopilot [+ copter video]

We are happy to announce the new version of our Raspberry Pi autopilot - Navio+, that was developed to run APM under Linux. With more than 300 Navios in the wild we’ve got plenty of feedback and now it is…

Continue

Added by Emlid on January 7, 2015 at 5:08am — 23 Comments

Maiden drive of APM:Rover2 on Raspberry Pi with Navio

Hello guys!

We were fascinated by the idea of controlling a drone directly from Linux from the very beginning. Navio was created exactly with that purpose in mind. Your support let us finalize the hardware and get to…

Continue

Added by Emlid on November 24, 2014 at 8:30am — 2 Comments

Last day on Indiegogo for Navio - autopilot shield for Raspberry Pi.

 

Indiegogo campaign for Navio is about to close in 14 hours. Emlid team would like to thank DIYdrones community for…

Continue

Added by Emlid on July 7, 2014 at 9:06am — 3 Comments

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service