Yannis's Blog (2)

Lightweight 3D Printed Endurance Quadcopter

I'd like to share a project I've been busy with for the past months. It's a lightweight, small size quadcopter built for long flight time. The AUW of the quad is 85g, and uses geared propulsion with micro DC motors. Controlled by a F4 brushed flight controller, and using a 300mah 2S lipo battery. With this configuration it achieves around 10 mins flight time, which could be further increased with a redesign of some structural parts focusing further on…

Continue

Added by yannis on July 20, 2018 at 8:00am — 9 Comments

Building a sub-500 gram (< 1.1 pound) quadcopter

I wanted to build a lightweight quadcopter frame for some time, and I've eventually found time to do it. Hereby I summarize some aspects of the build that allowed me to save weight.

Note that this is a summary of the complete post in my blog.

I’ve chosen to build a very simple X frame for this build. The frame is made out…

Continue

Added by yannis on September 18, 2017 at 3:00pm — 5 Comments

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service